Notes concerning use of “Update” and “Add New Feature”0 In order to use these functions, you must have the correct systemrequirements and settings for an Internet connection. (v p. 57)0 Do not turn off the power until updating or upgrading is completed.0 Approximately 1 hour is required for the updating/upgrading procedureto be completed.0 Once updating/upgrade starts, normal operations on this unit cannotbe performed until updating/upgrading is completed. Furthermore,there may be cases where backup data is reset for the parameters,etc., set on this unit.0 If the update or upgrade fails, press and hold the X on the main unit formore than 5 seconds, or remove and re-insert the power cord. “Updateretry” appears on the display and update restarts from the point atwhich update failed. If the error continues despite this, check thenetwork environment.0 Information regarding the “Update” function and “Add New Feature” will beannounced on the Denon website each time related plans are defined.InformationShow information about this unit settings, input signals, etc.o AudioShow the audio information for MAIN ZONE.Sound Mode: The currently set sound mode.Input Signal: The input signal type.Format: The number of input signal channels(presence of front, surround, LFE).Sample Rate: The input signal’s sampling frequency.Offset: The dialogue normalization correctionvalue.Flag:This is displayed when inputting signalsincluding a surround back channel.“MATRIX” is displayed with DTS-ESMatrix input signals, “DISCRETE” withDTS-ES Discrete signals.Contents Connections Playback Settings Tips Appendix203Front panel Display Rear panel Remote Index
