n When connecting using Wi-Fi1. Select “Wireless connection” on the TV screen.2. Check that your iOS device is connected to the wireless LAN(Wi-Fi) router and select “Denon AVR-S720W” from “SET UPNEW AIRPLAY SPEAKER...” at the bottom of the Wi-Ficonfiguration screen of your iOS device.3. Tap “Next” on the screen of the iOS device.0 The iOS device firmware version needs to support iOS 7 or later.n When using a USB cable1. Select “USB cable” on the TV screen.2. Check that your iOS device is connected to the wireless LAN(Wi-Fi) and connect it to the USB port on the front panel using aUSB cable.3. Select “Connect” on the TV screen.4. Tap “Allow” when the connection message appears on thescreen of your iOS device.0 The iOS device firmware version needs to support iOS 5 or later.o WPS RouterUse a WPS-compatible router to connect.There are two ways to connect, using the push button method or thePIN code method. Select the connection method to match your router.n When connecting using the push button method1. Select “Push Button” on the TV screen.2. Switch to the WPS mode by pressing the WPS button of therouter you wish to connect to.0 The time for pressing the button varies depending on therouter.3. Select “Connect” on the TV screen within 2 minutes.n When connecting using the PIN code method1. Select “PIN” on the TV screen.2. Register the PIN code of the unit in the router.Contents Connections Playback Settings Tips Appendix190Front panel Display Rear panel Remote Index
