SpeakersThe acoustic characteristics of the connected speakers and listening room are measured and the optimum settings are made automatically. This is called“Audyssey® Setup”.You do not have to perform Audyssey® Setup when you have already performed “Sp.Calibration” in “Setup Assistant”.To set up the speakers manually, use “Manual Setup” on the menu. (v p. 178)Audyssey® SetupTo perform measurement, place the Sound calibration microphone inmultiple locations all around the listening area. For best results, werecommend you measure in six positions, as shown in the illustration.When measuring the second and subsequent positions, install the Soundcalibration microphone within 2 ft (60 cm) of the first measurement position(main listening position).0 If you perform the Audyssey® Setup, the Audyssey MultEQ®, Audyssey DynamicEQ® and Audyssey Dynamic Volume® functions are enabled. (v p. 151) .FL SW C FRSRSLSurround speaker (R)Surround speaker (L)SubwooferCenter speakerFront speaker (R)Front speaker (L)( :Measuring positions)FLFRCSWSLSRListening positionContents Connections Playback Settings Tips Appendix167Front panel Display Rear panel Remote Index