Dension Lite BT Manual For Installation

Also see for Lite BT: User guide User manual General user guide

Contents

Dension Lite BT Manual For Installation Manual pdf 25 page image

Gateway Pro BT support issues25I. CDC not removed properly (CD-Changer is still present on iBus)On BMW, it happens quite often that they forget to disconnect the original CD-Changer properly.Please note: The installer needs to disconnect all cables physically at the CD-Changer (2 separatewires), otherwise they will experience strange issues like:- Volume changes automatically/randomly within 10-15 seconds- CD-Changer source can or cannot be selected but even if you select it, you are back toradio mode within 2-3 seconds- Function buttons are not or not fully working (e.g. FFW)- You cannot enter to the Text mode selector menuJ. Factory phone is connectedThose Gateway devices with integrated phone option, do not work properly together with factoryphone modules. So it is not possible to use our device only for having BT Audio (A2DP) and use thefactory option for HFP.Removing the factory phone is highly recommended. Else the phone function has to be disabled onthe Gateway.K. Activation on VW – Media and Phone (GWP1V21)The Media option is disabled on most CAN BAP based systems (VW – GW17V21), therefore it has tobe coded before or after the Gateway installation. The procedure is not difficult (takes 10 minutesapprox.), the vehicle needs to be taken to the VW service and the ‘Media Player 3’ option (2E) has tobe programmed using a service computer.In order to have phone option on the cluster display too (MFA High Line or Maxi Dote is required) youneed to program ‘Phone’ option (77) too using a Service computer (Autologic or VAG-COM). Havingthat option coded on RCD/RNS 310 (called Swing and Amundsen in Skoda) is essential for the phonemenu is available on the cluster display only with these radios.L. How to generate the GW_EES.BIN file:The GW_EES.BIN file provides important information regarding- the exact firmware version- the basic settings (text, or car configuration)- connected devices (like DAB+G)To generate the file you need to have a simple USB thumb drive which is- formatted to FAT 32- has only one partition- has at least one playable music content on itYou need to1. Power the system ON (radio, ignition)2. Connect the USB drive to the Gateway (it starts to operate)