Dension Lite BT Manual For Installation

Also see for Lite BT: User guide User manual General user guide

Contents

Dension Lite BT Manual For Installation Manual pdf 6 page image

Troubleshooting Guide for Installing Dension Products6On some BMW radios, there is an ‘M’ button between the Next Track and Previous Track buttons tochange the function to FF (Fast Forward) and REW (Rewind).On these radios, use the ‘M’ button for the text activation procedure:1. Turn the Radio ON and select the Gateway (CD-Changer)2. Disconnect all devices from the Gateway and wait until CD5 / Track99 is displayed on the radio3. Press the ‘M’ button on the radio, an ‘M’ should appear on the radio display4. Keep the FF (Fast Forward) button pressed for at least 10 seconds, then release.5. The display will show ‘Disc 1 / track 01’ within 3 seconds (indicating that you are in textselection mode)6. Press the ‘M’ button on the radio to select Next/Back function7. By pressing the Next track button, you can choose Tracks 02 through 04 which representdifferent screen modes (e.g. MID, Radio). Please note: Track 01 is non-Text Mode8. After choosing the mode you prefer, press ‘M’ then press FF (Fast Forward) to confirm andsave the selection. Or, by pressing the REW (Rewind) you can exit Text selector and discardchanges.9. If the text mode selection is correct ‘AUX GW’ will appear on the display10. If the text selection was not successful, try again from step #3 and chose another option. Someradios will work only with a specific track setting.B. How to set text display on ToyotaSome Toyota radios are capable of displaying basic text information. To show these press “DISP”, “TXT”or “TEXT” button on the radio. If you have any of these buttons on the radio and the text informationdoes not appear on the display, your radio is not capable of displaying such information.