104[8.1.1] ID entry screenSelecting the "1:ID" on the RF parameter menu calls up the screenshown at left where the current setting is displayed.[1] SSID Sets a service set ID to be used on the RF communicationsnetwork.Press the ENT key. The screen enters the alphanumeric entry modein which a cursor appears.Make the desired settings with the numerical keys and period (.) key.To switch the entry mode between the numeric mode (withoutguidance) and alphabet mode, press the SF key. After completion ofsettings, press the ENT key.In the entry mode, to delete a single character, press the BS key. Todelete the whole entry you made, press the C key.For details about the client name and service set ID, refer to Section3.1.2.Pressing the C key when any item is highlighted will display theconfirmation message as shown at left.To save the new entry, choose "1:Yes" and press the ENT key.The screen will return to the RF parameter menu.To cancel the new entry, choose "2:No" and press the ENT key.The newly entered data will be discarded and the screen will returnto the RF parameter menu.
