Chapter 2 Getting Started the BHT and System Mode119[ 13 ] Downloading/Uploading the System Message FileThe system message file (named "_B30MSG.FN3") stores system messages, e.g., "Shutdown inprogress. Do not remove the battery." and "Charge the battery!."The SYSTEM MESSAGE transfer menu allows you to upload or download the system message fileto/from the host computer.If you select the "2: UPLOAD," the system will set up the system message file based on the currentsettings and upload it to the host computer. After that, the created file will be deleted.If you select the "1: DOWNLOAD," the BHT will receive the system message file from the host computerand read in the messages stored in the file. After that, the received file will be deleted.For uploading/downloading, the BHT will use the communications parameters, communications protocol,and interface port specified in Section 2.5.3, "[4.5] Setting the communications environments."Usually you do not need to use the SYSTEM MESSAGE transfer menu since system messages havebeen set up at the time of delivery from the factory.SYSTEM MESSAGE transfer menuOn the SYSTEM MENU, pressing the 6 key with the SF key helddown calls up the screen shown at left.[1] DOWNLOAD: Downloads the system message file to the userarea of the BHT.[2] UPLOAD: Uploads the system message file stored in theBHT.Select a desired item by using the numerical keys or F5 and F6 keys,then press the ENT key.Press the C key to return to the SYSTEM MENU.