108Setting TRANSMIT KEYSelecting the "5:TRANSMIT KEY" on the WEP KEY definition screencalls up the screen shown at left.Select a desired item by using the numerical keys or F7 and F8 keys.For details about the TRANSMIT KEY, refer to Section 3.1.2.Pressing the C key will display the confirmation screen as shown atleft.To save the new entry, choose "1:Yes" and press the ENT key. Thescreen will return to the WEP KEY definition screen.To cancel the new entry, choose "2:No" and press the ENT key. Thenewly entered data will be discarded and the screen will return to theWEP KEY definition screen.[8.1.4] RF parameter initialization screenSelecting the "4:INITIALIZE" on the RF parameter menu calls up thescreen shown at left.To initialize the RF parameters, choose "1:Yes" and press the ENTkey. Initialization will start with the "** Initializing **" displayed. Aftercompletion of initialization, the screen returns to the RF parametermenu.To cancel initialization, choose "2:No" and press the ENT key. Thescreen will return to the RF parameter menu.
