Chapter 2 Getting Started the BHT and System Mode117If an error occurs during uploadingIf some error occurs during uploading, the BHT beeps three times and shows one of the followingscreens:To retry the uploading operation, press the 1 and ENT keys; to abort it, press the 2 and ENT keys.Press the C key to return to the SYSTEM PARAMETER transfer menu. ProblemThe memory is insufficient for setting up the BHT system parameterfile to be uploaded. SolutionPress the C key to return to the SYSTEM MENU, then deleteunnecessary files in the memory. (Refer to Section 2.5.3, [ 9 ].) ProblemThe memory has already contained 120 files, so the BHT systemparameter file cannot be set up. SolutionPress the C key to return to the SYSTEM MENU, then deleteunnecessary files in the memory. (Refer to Section 2.5.3, [ 9 ].) ProblemUploading has failed. SolutionTo retry uploading, press the 1 key.To return to the SYSTEM MENU, press the 2 key. Check the interfaceport, communications parameters, and communications protocol typein the SET SYSTEM menu or perform the communications test in theTEST menu. (Refer to Section 2.5.3, [4.5] and [5.7].)It is also necessary to check the communications parameters setup ofthe host computer.
