Desa VH Series Stove"VICTOR HEARTH" Owner's Operation And Installation Manual
Also see for Amity PSCIVFC Series: OWNER'S OPERATION AND INSTALLATION MANUAL
                                        | |
www.desatech.com112127-01C 7Figure 8 - Removing Pallet Wood FromThe Bottom of The StovePallet WoodBolt Pallet WoodBottom OfStove UnitFrontFigure 9 - Locating Threaded Holes forLegs and Door AttachmentLegHoleFrontDoor HingeStep Bolt HoleBottom OfStove Unit9. Fasten each leg to stove with four (4) M8x 1.25 - 20 mm bolts. Use a flat washerand lock washer with each bolt. Tightenbolts into threaded holes on stove body(see Figures 9 and 10). Use an adjustablewrench or a 12 mm socket.10. Attach stove door by inserting step boltthrough door hinge pivot hole and intothreaded hole in stove body (see Figures9 and 11). Use an adjustable wrenchor a 12 mm socket to fasten step bolt.Tighten step bolt until snug. Make suredoor moves freely.11. Install door catch bolt (M8 x 1.25-55 mmwith two M8 hex nuts) into threaded holeon stove body (see Figure 9). Use anadjustable wrench or a 12 mm socket.The catch bolt has two hex nuts attachedto it (see Figure 12). The top nut is a boltstop and the bottom nut is for door levelingadjustment.Burner systemassemBLyContinuedDoor Catch BoltWith AdjustableHex Nuts HoleFigure 10 - Attaching Stove Legs(Oxford™ Model Shown)Bottom OfStove UnitLegBoltWashersFigure 11 - Attaching Stove DoorStepBoltDoor HingeThreadedHoleStove DoorBolt ShoulderAdjustingNutBolt StopCatchBoltDoor ClawDoorFigure 12 - Catch Bolt and Door ClawOrientation12. Check general catch bolt alignment withdoor claw. Make final adjustment and doorleveling after stove is in normal standingposition.13. Carefully lift stove back up on its four at-tached legs. |
manualsdatabase
Your AI-powered manual search engine