Eaton 93PM Installation And Operation Manual

Also see for 93PM IBC-L: User and installation guide Manual User and installation guide User and installation guide Installation manual

Contents

UPS Operating Instructions6-6 Eaton 93PM UPS (60–100 kW, 480V) Installation and Operation Manual P-164000227—Rev 2 www.eaton.com/powerquality6.2.6 Display Menu OperationTable 6-3 describes the menu functions and how to use them.Table 6-3. Display Menu OperationFunction Subfunction OperationHome An overview of UPS operation, including information on load, efficiency and consumption.Meters – UPS The Meter screens show the UPS meter readings for the unit. The default voltage displayed on thesescreens is phase-to-neutral. These can be changed to display the voltage phase-to-phase(A-B, B-C, C-A). Tap the METERS tab on the main menu navigation bar to display the Meter screens.The current UPS readings are displayed in the information area of the screen. To display individualmeter details, tap the desired meter button for to display the detailed meter screen.Output – UPS The Output screen shows output voltage (phasetoneutral), output current (each phase), and frequencybeing supplied by the UPS, as well as the kVA, kW, and power factor measurements.Input – UPS The Input screen shows input voltage (phasetoneutral), input current (each phase), and frequency ofthe incoming utility source, as well as the kVA, kW, and power factor measurements.Bypass The Bypass screen shows the bypass input voltage (phasetoneutral), input current (each phase), andfrequency of the incoming utility source, as well as the kVA, kW, and power factor measurements.Battery – UPS The Battery screen displays the battery voltage (Vdc) and the battery current (Idc).Mimics UPS Mimic Tap the MIMICS tab on the main menu navigation bar to display an overview of UPS operation,including information on load, efficiency and consumption. If there is an error, an error indicator isdisplayed next to the affected part. Active events log can be opened by tapping the error indicator.UPS Module Map Tap the UPS MODULE MAP tab on the secondary menu navigation bar to display the status of eachUPM.System Overview Tap the SYSTEM OVERVIEW tab on the secondary menu navigation bar to display the status andmeters summary for each UPS.ESS Tap the ESS tab on the secondary menu navigation bar to display the approximate consumption andenergy savings of ESS mode.Logs Active Tap the LOGS tab on the main menu navigation bar to display the events screen. A listing of all systemevents that are currently active is displayed. The most recent event is listed first. As events clear, theyare removed from the Events listing. To scroll through the events, press the up or down scroll bar.System Events (Historical) Tap the SYSTEM LOG tab on the secondary menu navigation bar to display the system events screen.The history Log lists up to 512 events in chronological order, with the most recent event listed last(once 512 is reached, the earliest event is overwritten). The end of the log (the most recent events) isdisplayed first; scroll upward to view older event listings. To scroll through the events, press the up ordown scroll bar.Settings Configurable system settings. Tap the SETTINGS tab on the main menu navigation bar to display thesettings screen. Settings may be password restricted.User Tap the USER tab on the secondary menu navigation bar to display the user screen. Tap theINFORMATION or ABOUT button to display system information. See Figure 6-5 for user screen.Configuration Tap the CONFIGURATION tab on the secondary menu navigation bar to display the configurationscreen. Tap the function to be changed. Make and save the changes. Follow screen prompts to acceptor abort changes. SeeFigure 6-6 for configuration screen.Statistics Statistics Summary Tap the STATISTICS tab on the main menu navigation bar to display a summary of UPS statistics.Statistics Details Tap the desired statistic button for to display the detailed statistic screen.Controls See paragraph 6.2.8 for details.