Eaton 93PM Installation Manual

Also see for 93PM IBC-L: User and installation guide Manual Installation and operation manual User and installation guide User and installation guide

Contents

Eaton 93PM Integrated Battery Cabinet-Small Welded (IBC-SW) Installation Manual P-164000639—Rev 1 www.eaton.com/powerquality 2-1Chapter 2 Safety WarningsIMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONSThis manual contains important instructions that should be followed during installation andmaintenance of the UPS system and batteries. Read all instructions before operating theequipment and save this manual for future reference.The UPS system is designed for industrial or computer room applications, and contains safetyshields behind the cover and front panels. However, the UPS system is a sophisticated powersystem and should be handled with appropriate care.DANGERThis UPS system contains LETHAL VOLTAGES. All repairs and service should be performed byAUTHORIZED SERVICE PERSONNEL ONLY. There are NO USER SERVICEABLE PARTS inside theUPS.WARNINGl The UPS system is powered by its own energy source (batteries). The output terminals maycarry live voltage even when the UPS is disconnected from an AC source.l The battery cabinet contains its own energy source. The internal wiring and output terminalsmay carry live voltage even when the UPS is not connected to an AC source.l To reduce the risk of fire or electric shock, install this UPS system in a temperature and humiditycontrolled, indoor environment, free of conductive contaminants. Ambient temperature mustnot exceed 40C (104F). Do not operate near water or excessive humidity (95% maximum).The system is not intended for outdoor use.l As a result of the connected loads high leakage current is possible. Connection to earth groundis required for safety and proper product operation. Do not check UPS system operation by anyaction that includes removal of the earth (ground) connection with loads attached.l Ensure all power is disconnected before performing installation or service.l Batteries can present a risk of electrical shock or burn from high short-circuit current. Thefollowing precautions should be observed: 1) Remove watches, rings, or other metal objects;2) Use tools with insulated handles; 3) Do not lay tools or metal parts on top of batteries;4) Wear rubber gloves and boots.l ELECTRIC ENERGY HAZARD. Do not attempt to alter any UPS system or battery wiring orconnectors. Attempting to alter wiring can cause injury.l Do not open or mutilate batteries. Released electrolyte is harmful to the skin and eyes. It maybe toxic.CAUTIONl Installation or servicing should be performed by qualified service personnel knowledgeable ofUPS and battery systems, and required precautions. Keep unauthorized personnel away fromequipment. Consider all warnings, cautions, and notes before installing or servicing equipment.DO NOT DISCONNECT the batteries while the UPS is in Battery mode.l Batteries may only be replaced with the same number and type by authorized servicepersonnel. No user serviceable parts.