Eaton 93PM Integrated Battery Cabinet-Small Welded (IBC-SW) Installation Manual P-164000639—Rev 1 www.eaton.com/powerquality 7-1Chapter 7 Product SpecificationsThis section provides the following specifications:l Model Numbersl Battery specificationsl Battery runtimesl Environmental and safety specifications7.1 Model NumbersThe Integrated Battery Cabinet – Small Welded (IBC–SW) is available in one model to meet the needs of theEaton 93PM UPS product line.7.2 SpecificationsThe following sections detail the battery specifications, battery runtimes, and the environmental and safetyspecifications for the UPS. Specifications are subject to change.7.2.1 Battery SpecificationsCAUTIONThe shelf life for the batteries installed in the IBC–SW is 12 months from the date code on thebattery. The recharge date is also stated on a label inside the IBC–SW.Failure to recharge the batteries before the expiration of the shelf life will result in reduceddischarge time, shorter float service life, and will void the warranty.Integrated Battery Cabinet (IBC–SW)Models DescriptionEaton 93PM Integrated Battery Cabinet–SmallWeldedIBC–SW for Eaton 93PM 50 kW, 100 kW, 150 kW and 200 kW UPSIBC–SW Battery Type Eaton PWHR12200W4FR or CSB HRL12200WFR 80 Watts/cellvalve-regulated lead-acid (VRLA) with a 3-5 year float service life at 77°F(25°C)Number of Strings 1 stringBattery Replacement Must be replaced by a qualified service technicianProtection IBC–SW output protected by 250A circuit breaker.
