Eaton 9PXM User Manual
Also see for 9PXM: ManualUser guideUser guide
                                                                                                                                  |
4–20kVA Users Guide P-164000669 4–20kVA Users Guide P-164000669—Rev 09 13NOTE 1 The UPS cabinets may be installed in an EIA-standard 48.3 cm (19") equipment rack. Anoptional rack-mounting kit (P-157002204), containing brackets and required hardware, isavailable.NOTE 2 This procedure is also applicable to the P-103002494 12-slot external battery module(EBM).Use the following mounting procedures to install the UPS cabinet into the equipment rack:1. Install rack-mount ears ( two per side ) on each side of the UPS cabinet ( See Figure 10).Figure 10. Rack-Mount Ear installationRack-MountEars2. Select the proper holes in the front vertical rack rails that position the rack tray at the bottom in the rackand extend the back rails to align with the rear holes. Secure with the screws and washers (see Figure 11).Rack-Mount Installation |
Related manuals for Eaton 9PXM
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine