Eaton 9PXM User Manual
Also see for 9PXM: ManualUser guideUser guide
                                                                                                                                  |
50 4–20kVA Users Guide P-164000669 4–20kVA Users Guide P-164000669—Rev 09Figure 42. Super Charger LocationSuperChargerBatteryModulesBatteryModulesEBM Front View(Covers removed)UPS DCTerminalCoversDC EmergencyDisconnectSwitchCommunicationPortsEBMUPS ACTerminalCoversEBM Front EBM BackPrepare the EBM CabinetNOTE 1 The external battery cabinets are the same dimensions as the UPS cabinets. Refer tothe ”2.1 Preparing for Installation ” section for unpacking and cabinet setup.NOTE 2 If you are installing multiple EBM(s) upstream to the UPS, repeat the setup as describedin this section.1. Open the carton containing the external battery cabinet cable assembly and position it in the desiredlocation next to the UPS.2. If you are rack-mounting the EBM cabinet, refer to the UPS rack-mount installation procedure (see2.6 Rack-Mount Installation ). If not, proceed to the next step.3. Install the anchor brackets to the floor if applicable (see 2.5 Anchor Bracket Installation ).Connected Battery Cabinet Option |
Related manuals for Eaton 9PXM
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine