Eaton All-Pro MSLED300W Instruction Manual

1Questions?/Des questions?/¿Preguntas? 1-800-334-6871 ConsumerProducts@eaton.comInstruction Manual/Manuel d’instructions/Instrucciones• Locate fixture away from moving objects such as trees, large shrubs and street traffic.• Keep solar panel clear of any objects that will block the sunlight. It will be necessary toperiodically clean the solar panel with soft wet cloth.• During periods of several cloudy days, the battery may fall below the operating level andwill need to be recharged with sunlight.MOUNTING YOUR FIXTURE1. Locate area in which you would like to install yourlight fixture.NOTE: For fixture to operate properly, the fixturemust be located in an area that will receive the maximumamount of sunlight and is free from obstructions.2. Using the fixture mounting screws (C) provided,mount the snap-in mounting bracket (B) to a solidsurface by placing the screws through the centerholes of the bracket. Make sure the tab on thebracket is pointing down. (Fig. 2).3. Slide power switch to AUTO.4. Slide fixture down over the snap-in mountingbracket, making sure that the fixture engages theguide ribs. Continue sliding down until the fixturesnaps into the locking tab.For Portable Use1. Press the quick release tab on the mountingbracket to remove fixture.NOTE: Be sure to keep the fixture in the OFF positionwhen not in use to conserve the battery.2. Slide fixture onto mounting bracket (Fig. 4) whenfinished.PACKAGING CONTENTS/CONTENIDO DEL PAQUETEITEMS REQUIRED(Purchase separately)• Phillips screwdriverHOW IT WORKSDuring the daylight hours, the solar panel turns the sunlightinto energy that is stored in the rechargeable battery pack.Your light features a motion sensor that turns the light ONat night when motion is detected. This light is equippedwith a photocell, which only allows the fixture to turn ONduring the nighttime hours.WARNINGS AND CAUTIONSINSTRUCTIONS PERTAINING TO A RISK OF FIRE OR INJURY TO PERSONS.To reduce the risk of fire or injury to persons, read and follow these instructions:• DO NOT replace batteries.• DO NOT dispose of this product in fire. Batteries inside this product may explode or leak.• DO NOT puncture this battery pack. DO NOT work on this battery pack• DO NOT disassemble fixture. The fixture does not have any user serviceable parts.• Lithium-Ion batteries must be disposed of in accordance with local waste ordinances andregulations.• Do not operate luminaire with a missing or damaged lens.• Fixture is suitable for wall mount only. NOT suitable for ground mount installation.SAVE THESE INSTRUCTIONS.FOR BEST RESULTS• Allow fixture to receive four full days of sunlight before turning fixture ON.• Locate fixture in an area that will receive themaximum amount of sunlight during the daylighthours. Panel must receive at least 3-4 hours ofdirect sunlight daily.• Test your charged unit before installing.• Locate fixture so motion moves across thedetection zone (Fig. 1).• Locate fixture away from heat producing sources toprevent false triggering. Also be very careful not toinclude objects such as windows, white walls andwater in the detection zone.A. Light fixtureAccesorioLuminaireENGLISHB. Snap-in mounting bracketSoporte de montaje de sujeción a presiónSupport de montage encastrableC. (2) Fixture mounting screws(2) Tornillos de montaje del accesorio(2) Vis de montage du luminaireUp to25 feet120 degreesFig. 2BCCFig. 1MSLED300(Black/Noir/Negro)Fig. 3AMSLED300W(White/Blanco/Blanc)Fig. 4AQuick Release TabLengüeta de liberación rápidaLanguette à dégagement rapide

/ 4

Related manuals for Eaton All-Pro MSLED300