Intelligent Technologies (IT.) D77A I/O Module Products16 For more information visit: www.EatonElectrical.com MN05002001EAnalog Output Module SpecificationsTable 19: D77A-NQ2 Analog Output Module SpecificationsFigure 10: D77A-NQ2 Combination Module Diagramsa) D77A-NQ2 Module, Voltage Output Channelsb) D77A-NQ2 Module Current Output ChannelsSee D77A-NQ2 Analog Output Module Specifications on page 16Catalog NumberD77A-NI4Voltage Output Current Loop OutputVoltage Output 0 – 5V, 1 – 5V, 0 – 10V DC —Current Output — 4 – 20 mA, 0 – 20 mAOutput Type Single End, Uni-polarResolution Voltage Resolution Current Resolution0-5VDC 13bit 0-20mA 14 bit0-10VDC 14 bit 4-20mA 14 bit1-5VDC 13 bitOutput Full Scale Range 0 – 10.5V or 0 – 5.25V 0 – 21 mAMaximum Overload at Input Terminal 36V DCNumber of Channels 2Resistive Load — Less than 500 ohmsLoad Range Greater than 1k ohm —Maximum Inductive Load — 0.1 mHMaximum Capacitive Load 1 μF —Accuracy +/– 0.8% Full Scale @ 25°C+/– 1.0% Full Scale @ 0-55°CUpdate Rate 350 NSOutput Impedance 10 ohmOutput Ripple (0-50 Hz) +/-0.1%Operating Temperature 0–55°CStatus LED Indication Module StatusQCPort Current Draw 40 mAExternal Power 24 VDC, 60 mA MaximumOutput group-to-bus Isolation 1.5kV for 60 Sec.Terminal 12 Pins (Pitch, 5.2 mm)Terminal Screw Torque 4.5 inch-pounds (0.51 Newton-meters)JIC-001424VDC+ -NCNCNCNC24VDC++ --(V)(V)+-+-(I)(I)V0I0C0V1I1C1NCNCNCNC+-V0I0C0V1I1C1a b
