Intelligent Technologies (IT.) D77A I/O Module ProductsMN05002001E For more information visit: www.EatonElectrical.com 29Installing the ModuleThe module is now ready for installation on the DIN rail.1. The module must always be inserted perpendicular onto the DIN rail. Push the module straight back onto the DIN rail.2. Depress the locking tab to secure the module to the DIN rail.Figure 25: Lock DIN Rail Locking Taba) Locking Tabb) Locking Tab Captured3. Install the terminal strip on the front of the module.4. Lock the terminal strip into place using the locking tabs.Figure 26: Removable Terminal Locking TabCAUTION PRÉCAUTION PRECAUCIÓNDo no “rock” the module onto the DIN rail.The rocking action could damage themodule.Ne « basculez » pas le module sur le rail DIN.L’action de basculement pourraitendommager le module.No “meza” el módulo sobre el riel DIN. Elmecerlo podrá dañar el módulo.Notice Avis AvisoAfter the strip is installed, installinterconnects; see the IT. QCPort SystemInstall and Planning Guide (Publication No.MN05001002E) for more information.Après avoir installé la bande, installez lesinterconnecteurs ; voyez le Guide deplanification et d’installation du systèmebâbord IT. QCPort (publication no.MN05001002E) pour plus d’information.Después de instalada la banda, instale losinterconectadores, vea la Guía dePlanificación e Instalación del SistemaQCPort del IT. ( Publicación No.MN05001002E) para obtener másinformación.baD77A-018D77A-01908214412610
