Intelligent Technologies (IT.) D77A I/O Module ProductsMN05002001E For more information visit: www.EatonElectrical.com 31Installing the ModuleThe module is now ready for installation on the DIN rail.1. Line the center of the module up with the backplane connector on the DIN rail. Ensure the backplane connector is installed withthe arrows up. The module must always be inserted perpendicular onto the DIN rail.2. Push the module straight back onto the DIN rail and backplane connector.3. Depress the locking tab to secure the module to the DIN rail.Figure 29: Lock DIN Rail Locking Taba) Locking Tabb) Locking Tab Captured4. Install the terminal strip on the front of the module.5. Lock the terminal strip into place using the locking tabs.Figure 30: Removable Terminal Locking TabCAUTION PRÉCAUTION PRECAUCIÓNDo not “rock” the module onto the DIN rail.The rocking action could damage themodule.Ne « basculez » pas le module sur le rail DIN.L’action de basculement pourraitendommager le module.No “meza” el módulo sobre el riel DIN. Elmecerlo podrá dañar el módulo.baD77A-018D77A-01908214412610
