Eaton D77A Installation And User Manual

Contents

Intelligent Technologies (IT.) D77A I/O Module ProductsMN05002001E For more information visit: www.EatonElectrical.com 51Table 48: 0x8006 (32774) Slave AddressTable 49: 0x8007 (32775) Production DestinationTable 50: 0x8008 (32776) Device ID TagTable 51: 0x8009 (32777) Production IntervalTable 52: 0x800A (32778) Consumption IntervalTable 53: 0x800B (32779) Parameter ListTable 54: 0x800C (32780) Production ListTable 55: 0x800D (32781) Consumption ListTable 56: 0x800E (32782) Languages SupportedSize Description1 byte This parameter specifies the address used by a Master for data transfers in the Master/Slave Data Protocol.The default value must be 0x00 (unconfigured), requiring a Master to set this value prior to using the Master/Slave Data Protocol.Size Description2 bytes This parameter specifies the destination Node ID to be used by a device in either the Simple System or WireReplacer Data Protocols. The MSB indicates the Group ID; the LSB indicates the Member ID.An Initial Value of 0x0000 indicates an unconfigured state. In this state, a device assumes a current value equalto its Group ID and a Member ID of 0x00. This results in its Production Data being targeted at all members of itsGroup.Size Description32 bytes This parameter specifies the 32-character ASCII string ID tag assigned to a device, pre-assigned at the factorybut can be set by the user.Size Description2 bytes This parameter specifies the rate, in milliseconds, at which a producing device generates a Data Protocolmessage in either Simple System or Wire Replacer mode.A value of 0 disables this timer.Size Description2 bytes This parameter is the value to which the consumption timer is set whenever there is a set of the current value ofany parameter on the consumption list.Expiration of this interval causes the module to execute communications loss behavior.A value of 0 disables this timer.Size Description92 bytes This read-only list specifies the n QCPort Parameters that a device supports.Size Description2 bytes This 2n-byte read-only list specifies the n QCPort Parameters included in a device’s QCPort Data Parameter0x0001, Production Data.Setting Parameter Attribute 0x09, “Production List Member,” to TRUE, designates a Parameter’s membership inthis list. Only Parameters supporting Attribute 0x09 are eligible for inclusion in this list.Ordering of Parameter IDs in the Production List is based first on Parameter data size and then sequentiallywithin Parameters of like size. For example, all Parameters with an even number of bytes would appear firstsequentially, followed by Parameters with an odd number of bytes.Size Description2 bytes This 2n-byte read-only list specifies the n QCPort Parameters included in a device’s QCPort Data Parameter0x0002, Consumption Data.Setting Parameter Attribute 0x0A, “Consumption List Member,” to TRUE, designates a Parameter’s membershipin this list. Only Parameters supporting Attribute 0x0A are eligible for inclusion in this list.Ordering of Parameter IDs in the Consumption List is based first on Parameter data size and then sequentiallywithin Parameters of like size. For example, Parameters with an even number of bytes would appear firstsequentially, followed by Parameters with an odd number of bytes.Size Descriptionn bytes This is a list of languages supported in the product. It consists of a list of bytes, each representing a differentlanguage.0x00 — English0x01 — Spanish0x02 — French0x03 — German0x04 — Italian

/ 62

Related manuals for Eaton D77A-AI8AQ8