Class A EMC StatementsFCC Part 15NOTE This equipment has been tested and found to comply with the limits for a Class A digital device,pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference when the equipment is operated in a commercial environment. This equipmentgenerates, uses, and can radiate radio frequency energy and, if not installed and used in accordance withthe instruction manual, may cause harmful interference to radio communications. Operation of thisequipment in a residential area is likely to cause harmful interference in which case the user will berequired to correct the interference at his own expense.ICES-003This Class A Interference Causing Equipment meets all requirements of the Canadian InterferenceCausing Equipment Regulations ICES‐003.Cet appareil numérique de la classe A respecte toutes les exigences du Reglement sur le matérielbrouilleur du Canada.For Users in GermanyWe hereby certify that the uninterruptible power system (QFE 500 VA, 700 VA, 850 VA, 1.15 kVA, 1.4 kVA,1.8 kVA, 2.1 kVA, 3.1 kVA, 4.3 kVA, 5.3 kVA, 7 kVA, 10 kVA, 12.5 kVA, and 18 kVA) complies with the RFIsuppression requirements of Vfg. 243/1991 and Vfg. 46/1992. The German Postal Service was notified thatthe equipment is being marketed. The German Postal Service has the right to retest the equipment andverify compliance.Hiermit wird bescheinigt, daß die unterbrechungsfreie Stromversorgung (QFE 500 VA, 700 VA, 850 VA,1.15 kVA, 1.4 kVA, 1.8 kVA, 2.1 kVA, 3.1 kVA, 4.3 kVA, 5.3 kVA, 7 kVA, 10 kVA, 12.5 kVA, and 18 kVA) inÜbereinstimmung mit den Bestimmungen der Vfg. 243/1991 und Vfg. 46/1992 funkentstört ist. DerDeutschen Bundespost wurde das Inverkehrbringen dieses Gerätes angezeigt und die Berechtigung zurÜberprüfung der Serie auf Einhaltung der Bestimmung eingeräumt.Eaton reserves the right to change specifications without prior notice. Eaton, Powerware, and FERRUPSare registered trademarks of Eaton Corporation or its subsidiaries and affiliates. All other trademarksare property of their respective companies.Copyright 2000–2010 Eaton Corporation, Raleigh, NC, USA. All rights reserved. No part of thisdocument may be reproduced in any way without the express written approval of Eaton Corporation.