Eaton IQ 250 User & Installation Manual

Also see for IQ 250: User & installation manual Quick start guide

Contents

8-24 IB02601006E www.eaton.comChapter 8:Programming the IQ 250/260 IQ 250/260 MeterPoll Power and Energy Click Real-Time Poll>Revenue, Energy and Demand Readings>Power and Energy. You will see the screenshown below.This screen displays the power and energy for Total Power and all three phases.1. Click the tabs at the top of the screen to select the view you want:• Total• Phase A• Phase B• Phase C2. Click Print to print the readings.3. Click OK to close the screen.Poll Accumulators Click Real-Time Poll>Revenue, Energy and Demand Readings>Accumulations. You will see the screen shown on the right.This screen displays the current readings for the Input andOutput Accumulators of any installed Relay Ouput/Digital Inputand Pulse Output/Digital Input Option cards.The readings are shown after the configured Compression andUnits/Count have been applied. For information on settingCompression and Units/Counts for Accumulators, refer tothe instructions for configuring Relay Output/Digital Inputand Pulse Output/Digital Input Cards, earlier in this chapter.Click OK to close the screen.