Eaton Network Card-MS User Manual

Also see for Network Card-MS: Quick start instructions Quick start

Contents

Configuring the CardEaton Network Card-MS User’s Guide P-164000100—Rev 1 www.eaton.com/powerquality 24Table 8. Security LevelsIcon LevelRedCriticalYellowWarningGrayUnknownTable 9. UPS AlarmsAlarm On Alarm OffBattery fuse blown Battery fuse OKNo Battery Battery presentBattery temperature fault Battery temperature OKBattery charger fault Battery charger OKBattery fault Battery OKMAX charger voltage fault Charger voltage OKMIN charger voltage fault Charger voltage OKCharger temperature fault Charger temperature OKRectifier fault Rectifier OKChopper fault Chopper OKNormal AC frequency out of tolerance Normal AC frequency OKNormal AC fuses blown Normal AC fuses OKNormal AC module fault Normal AC module OKNormal AC voltage out of tolerance Normal AC voltage OKNormal AC NOK Normal AC OKSite wiring fault Site wiring OKBypass AC frequency out of tolerance Bypass AC frequency OKBypass AC phase out of tolerance Bypass AC phase OKBypass AC voltage out of tolerance Bypass AC voltage OKAutomatic Bypass fault Automatic Bypass OKAutomatic Bypass overload Automatic Bypass load OKAutomatic Bypass overtemperature Automatic Bypass temperature OKAutomatic Bypass thermal overload Automatic Bypass load OKAutomatic Bypass switch (Q4S) open Automatic Bypass switch (Q4S) closedNormal AC switch (Q1) open Normal AC switch (Q1) closedBattery switch (QF1) open Battery switch (QF1) closedManual Bypass switch (Q3BP) closed Manual Bypass switch (Q3BP) openUPS on manual bypass —Output switch (Q5N) open Output switch (Q5N) closedSingle wave load fault Load OKNegative DC bus too high Negative DC bus OK