Eaton Network Card-MS User Manual

Also see for Network Card-MS: Quick start instructions Quick start

Contents

Using the Telnet/SSH/CLI InterfaceEaton Network Card-MS User’s Guide P-164000100—Rev 1 www.eaton.com/powerquality 55General CommandsUse general commands to open, close, and control sessions (see Table 14).Network CommandsUse network commands to administer network parameters and authorizations (see Table 15).Table 14. General CLI Interface Commandshelp or ? Display help about a specific command.Syntax help [command] or [command] ?Example #> help getNetwork or #> getNetwork ?setEcho Hide, or not, all characters. If hidden, each character entered is replaced by an asterisk (*).Syntax setEcho [option]Options ON | OFFExample #> setEcho ONquit Close a current CLI session.Syntax quitExample #> quitreset Reset the software.Syntax resetExample #>version Get information about the sotware version.Syntax versionExample #> versiondefaultPass Return to the default login and password.Syntax defaultPassExample #> defaultPassdefaultConf Return to the default configuration.Syntax defaultConfExample #> defaultConfTable 15. Network CommandsgetNetwork Read a network setting.Syntax getNetwork [option1] [option2] . . .Options DHCP | IPAddress | IPMask | IPGateway | HostName | DomainName | IPv6Enable | IPv6AutoConf |IPv6Address1 | PrefixLength | IPv6DefaultGateway | IPv6LocalAddress | IPv6Address2 | PrimaryDNS |SecondaryDNS | FirmwareUpgradeExample #> getNetwork IPAddress