Eaton Powerware 9140 User Manual

Also see for Powerware 9140: Reference guide User guide User guide Installation guide User guide

Contents

Class A EMC StatementsFCC Part 15NOTE This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant topart 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interferencewhen the equipment is operated in a commercial environment. This equipment generates, uses, and can radiateradio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmfulinterference to radio communications. Operation of this equipment in a residential area is likely to cause harmfulinterference in which case the user will be required to correct the interference at his own expense.ICES-003This Class A Interference Causing Equipment meets all requirements of the Canadian Interference CausingEquipment Regulations ICES‐003.Cet appareil numérique de la classe A respecte toutes les exigences du Reglement sur le matériel brouilleur duCanada.EN 50091-2Some configurations are classified under EN 50091-2 as “Class‐A UPS for Unrestricted Sales Distribution.” Forthese configurations, the following applies:WARNING This is a Class A‐UPS Product. In a domestic environment, this product may cause radio interference, inwhich case, the user may be required to take additional measures.Eaton, Powerware, ABM, LanSafe, and X-Slot are registered trademarks and ConnectUPS is a trademark ofEaton Corporation or its subsidiaries and affiliates. Greenlee is a registered trademark of Greenlee Textron.Microsoft and Windows are registered trademarks of Microsoft Corporation. Modbus is a registered trademark ofSchneider Automation. National Electrical Code and NEC are registered trademarks of National Fire ProtectionAssociation, Inc. All other trademarks are property of their respective companies.Copyright 2006–2010 Eaton Corporation, Raleigh, NC, USA. All rights reserved. No part of this document may bereproduced in any way without the express written approval of Eaton Corporation.