POWER WIRING INSTALLATION NOTES032406E164201554---5 14 of 15DESCRIPTION:DATE:DRAWING NO: SHEET:REVISION:Installation InformationA-25EATON Powerware® 9390 UPS (100–160 kVA) Installation and Operation Manual S 164201554 Rev E powerware.comTable Q. INPUT/OUTPUT Ratings for Powerware 9390---160/160 Parallel SystemConfiguration Units Rating 50/60 HzBasic Unit Rating at 0.9 lagging pF load kVAkW160144160144Input and Bypass InputOutputVOLTSVOLTS208/220208/220480480AllAC Input from UPMFull Load Current for each Module(3) Phases, (1) Neutral---if required, (1) Ground DAmps 444/420 192Minimum Conductor Size for each ModuleNumber per Phase for each ModuleAWG or kcmil(each)See Table E throughTable G for wire size.1+1AC Input to Tie Cabinet Bypass (optional)Full Load Current(3) Phases, (1) Neutral---if required, (1) GroundF Amps 444/420 192AC Output to Critical LoadFull Load Current(3) Phases, (1) Neutral---if required, (1) GroundG Amps 444/420 192System Neutral Bonding JumperNumber (See Note 27) --- AWG or kcmil(each)2/0(1)2(1)2+0and2+1AC Input to Tie Cabinet Bypass (optional)Full Load Current(3) Phases, (1) Neutral---if required, (1) GroundF Amps 888/840 384AC Output to Critical LoadFull Load Current(3) Phases, (1) Neutral---if required, (1) GroundG Amps 888/840 384System Neutral Bonding JumperMinimum Conductor SizeNumber (See Note 27)--- AWG or kcmil(each)1/0(2)1/0(1)3+0and3+1AC Input to Tie Cabinet Bypass (optional)Full Load Current(3) Phases, (1) Neutral---if required, (1) GroundF Amps 1332/1260 576AC Output to Critical LoadFull Load Current(3) Phases, (1) Neutral---if required, (1) GroundG Amps 1332/1260 576System Neutral Bonding JumperMinimum Conductor SizeNumber (See Note 27)--- AWG or kcmil(each)2/0(2)2/0(1)4+0AC Input to Tie Cabinet Bypass (optional)Full Load Current(3) Phases, (1) Neutral---if required, (1) GroundF Amps 1776/1680 768AC Output to Critical LoadFull Load Current(3) Phases, (1) Neutral---if required, (1) GroundG Amps 1776/1680 768System Neutral Bonding JumperMinimum Conductor SizeNumber (See Note 27)--- AWG or kcmil(each)3/0(2)3/0(1)NOTE: Callout letters D, F, and G map to drawing 164201554 ---4, sheets 4 of 6, 5 of 6,and 6 of 6.
