22INM 725B Rev 212 7 AP6 Cell Detail (Alarm Card - Remote Pushbutton)Cell type AP6 is used to provide:-• Four digital inputs for use with volt-free or powered contacts• Six external pushbutton inputs for use with optional remote mounting pushbuttonsas required.• Each of the external pushbutton inputs can be programmed to operate as either:- LampTest, Silence, Acknowledge, Reset, 1st Reset or System Test or Sleep Mode asrequired. The common return for all remote pushbuttons is +V (+24VDC)• The drawing above indicates the standard card types available for cell type AP6.• Multiple AP6 cells may be used in applications that require more than 6 x pushbuttoninputs or in systems using multiple pushbutton groups to control selective channelsWARNING !If remote pushbuttons are used they must be installed inthe same enclosure as the RTK 725B/C annunciator.ALARM CARD VERSIONS USED IN "AP6" CELLS(LOWER SLOT)CB6611POP1 - 24/125V SIGNAL INPUT VERSIONCB6611POP5 - 24/125V SIGNAL INPUT VERSIONPLUS TIME STAMPING OPTIONCB6611POP2 - 48V SIGNAL INPUT VERSIONCB6611POP6 - 48V SIGNAL INPUT VERSIONPLUS TIME STAMPING OPTIONCUSTOMERSVOLT FREEINPUTS3CHANNEL21AP62CINPUTS1C4 4C3CREAR VIEWPUSHBUTTONSP2P1 P4P3 P6P5REMOTE PB CARD VERSIONS USED IN "AP6" CELLS(UPPER SLOT)CB9427POP1 – REMOTE PUSHBUTTON