24 InStALLAtIon And opErAtIon mAnuAL 25-13741-C October 2018 www.eaton.com10. Installation6. Wiring: Wire the unit. For details refer to section 10.5Connection Status InstructionsHandset In place in received unitCradle In place in received unitEarth Connection In place in received unit. To be reconnected by installerCommunication – Panel To be done by installer Refer Fig. 33Outstation Loop To be done by installer Refer Fig. 33Figure 15: Connector Placement on Type A Outstation PCB7. Assemble the unit. Reconnect ground cable before closing the unit.Figure 16: Type A unit ready to be mountedOS TYPE A PCBHANDSETCRADLECANHOS OUT (PORT B)1 2 3 4 5 6CANLSHLDSHLDGND24VCANHOS IN (PORT A)1 2 3 4 5 6CANLSHLDSHLDGND24V
