Eaton xComfort User Manual
Also see for xComfort: Technical information
                        | |
Contents
|
xComfort Room Controller Touch User Manual 1v00_EN 8 | P a g e2.5.7 Show Time and Day of WeekThe current time and day of week can be displayed.2.5.8 (Optional) Touch-button(s)The Touch-buttons of the Room Controller Touch can be used as push buttons to control the lights,shutters/blinds in the room, for example, or to trigger Scenes in the xComfort SHC.Note: To get the Touch-buttons, an actuator or intelligent device must be connected to theTouch-button of the Room Controller during the installation. Contact your installer formore information.The Room Controller Touch has up to two Touch-buttons . Their behavior depends on theconfiguration during the installation:• 2x Single Pushbuttons: Each Touch-button is connected individually to an actuator(s) or to anintelligent device (e.g. the xComfort SHC). The Touch-button acts as single pole pushbutton.The Touch-button supports short pressing (e.g. switch on/off) and long pressing (e.g. dimmingup/down).• 2x Single Rocker with arrow keys: Each Touch-button is individually connected to an actuator(s)or to an intelligent device (e.g. xComfort SHC).When the Touch-button is pressed it will start flashing, and the arrow keys are shown, which canbe used ‘up ‘ or ‘down’. In this respect on the ‘up’ key, apply a short press to switch on and along press to dim up. Press briefly on the ‘down’ key to switch off or to dim down.• 1 Single Rocker: Both Touch-buttons are connected to the same actuator(s). The pair of Touch-buttons behave as one 2 pole pushbutton. The Touch-button on the left is the ON/UP(short/long press) part and on the right the OFF/DOWN part. |
Related manuals for Eaton xComfort
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine