Eaton xComfort User Manual
Also see for xComfort: Technical information
                        | |
Contents
|
xComfort Room Controller Touch User Manual 1v00_EN 10 | P a g e2.6.2 (Optional) Selecting Heating and/or Cooling modeIt is possible to select which temperature regulation mode should be active manually.(OFF) No icons displayed. No heating or cooling, e.g. regulation switch off.Heating mode. Regulation based on heating set-point(s) temperature only.Cooling mode. Regulation based on cooling set-point(s) temperature only.Heating&Cooling mode. Regulation based on both heating and cooling set-pointstemperature.Sensor ModeIf the Room Controller is connected to an xComfort SHC, it is possible to change manually between‘heating’, ‘cooling’ and ‘OFF’. In this case, the ‘Heating&Cooling’ mode is not available. When connectedto a Room Manager the temperature regulation mode cannot be changed.Control Mode* The available regulation modes depend on the configuration. If a heating or a cooling actuator isconnected only, then it is only possible to switch between ‘heating and OFF’ / ‘cooling and OFF’manually. If both actuators are connected, then all modes are available.OptionalStep 1(Show mode)Current active mode is shownStep 2(Select mode)Control Mode*(OFF)Sensor Mode(OFF)OptionalTimeout |
Related manuals for Eaton xComfort
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine