xComfort Room Controller Touch User Manual 1v00_EN 16 | P a g eLeave Timeout or2.7.4 (Optional) Edit/Set Current Time and DateSensor ModeThe option to set the Time and Date manually with the Room Controller is not available if the RoomController is connected to an xComfort SHC. In this case, the time and date are synchronized with thexComfort SHC date and time.Control ModeThe Time (Hours, Minutes) and Date (Day of Month, Month and Year) can be set manually if the WeekProgram is enabled during installation.Attention:The time and date are used for the execution of the Week Program. The Time and Dateneed to be set correctly for the correct operation of the Week ProgramInitial select ClockEnter Edit Mode