Eaton xComfort User Manual
Also see for xComfort: Technical information
                        | |
Contents
|
xComfort Room Controller Touch User Manual 1v00_EN 2 | P a g e2 The Room Controller Touch2.1 OperationThe Room Controller Touch is equipped with a Display with Backlight and Touch function. The display isused to display the information through which, by touching the display, the Room Controller Touch canbe operated.Note: The display is designed to respond to on-screen pressing only. Compared to the commonlyused touch displays for smartphones and tablets it may be the case that touching thedisplay a little more firmly is necessary.In the Idle-state the display shows the temperature and status with the backlight switched off. Ontouching the display it enters the Active-state. In this state, the backlight is switched on, and whenconnected to the xComfort SHC, the information is refreshed to get the latest status.Note: To maximize the battery life, a delay between the information on the display in the idle-state and the actual status in the xComfort SHC is possible. The maximum possible delaycan be reduced by the installer, but this will lead to a reduction in the battery life. In otherconfigurations the display always contains the latest information.Pre-defined temperature set-pointsFrost protectionNight / StandbyEconomyDay / ComfortRequest statusHeating requestCooling requestVentilation requestShown information selectionTemperatureHumidityClockOutdoor temperatureVariousUnits of the shown informationSettingTouch-buttonFloor temperature regulation activeLow battery indicationWeek program timerWeek program timer activity statusDay of WeekProgram timer switch time-point |
Related manuals for Eaton xComfort
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine