Falcon Professional + Kitchener 110 User Manual

INSTALLATIONCheck the appliance is electrically safe and gas sound when you have finished.30Replace the electric terminal cover box; make sure that theconduit is clear of the bottom flange.ChecksNote: The clock must be set before the ovens will work. See‘The Clock’ section for instructions on setting the time of day.Hotplate CheckCheck each burner in turn. There is a Flame SupervisionDevice (FSD) that stops the flow of gas to the burner if theflame goes out. For each burner, turn the control knob to thesolid flame symbol. Press in the control knob. This lets gasthrough to the burner. Keep holding the knob pressed in andpress the igniter button or light with a match. Keep holdingthe control knob pressed in for about 10 seconds.If, when you let go of the control knob the burner goes out,the safety device has not held in. Wait one minute then tryagain this time holding the control pressed in for slightlylonger.Grill CheckOpen the grill compartment door. Turn on the grill controland check that the grill heats up.Oven CheckTurn on the oven and check that it starts to heat up. Checkthat the oven lights are working.Note: The oven light bulb is not included in the guarantee.Turn off the oven.Final FittingFitting the 1-piece Plinth (Professional+)Remove the 3 screws for the plinth mounts along the frontbottom edge of the cooker (Fig.7-14). Fasten the plinth usingthese screws (alternative colour screws can be found in theloose parts pack).Fiting the 2-piece Plinth (Kitchener)Fit the inner plinth to the bottom front of the cooker usingthe 4 screws provided (Fig.7-15).Fit the outer plinth (2 screws 1 each end) to the inner plinth(Fig.7-16). Adjust the height of the outer plinth by sliding itup or down via the slotted hole.Customer CareInstaller: Please complete your details in this Guide, informthe user how to operate the cooker and hand oven theinstructions.Thank you.ArtNo.281-0026 - Front plinthFig.7-14ArtNo.350-0010 - Fitting the plinth 1 (Kitchener)Fig.7-15ArtNo.350-0011 - Fitting the plinth 2 (Kitchener)Outer plinthOuter plinth fixing screwInner plinthFig.7-16