GE 39-40425 Installation Instructions Manual

18Installation Instructions3MOUNT THE MICROWAVEOVENB6.FOR EASIER INSTALLATION AND PERSONALSAFETY, WE RECOMMEND THAT TWO PEOPLEINSTALL THIS MICROWAVE OVEN.NOTE: If your cabinet is metal, use the nylongrommet around the power cord hole to preventcutting of the cord.NOTE: We recommend using filler blocks if thecabinet front hangs below the cabinet bottom shelf.IMPORTANT: If filler blocks arenot used, case damage may occur fromovertightening screws.Insert a self-aligning screw through top centercabinet hole. Temporarily secure the oven byturning the screw at least two full turns after thethreads have engaged. (It will be completelytightened later.) Be sure to keep power cordtight. Be careful not to pinch the cord, especiallywhen mounting flush to bottom of cabinet.NOTE: When mountingthe microwave oven,thread power cordthrough hole in bottom oftop cabinet. Keep it tightthroughout Steps 1–3. Donot pinch cord or liftoven by pulling cord.Lift microwave, tiltit forward and hookslots at back bottomedge onto four lowertabs of mountingplate.764Cabinet FrontCabinet Bottom ShelfTighten the outer two screws to the top of themicrowave oven. (While tightening screws, holdthe microwave oven in place against the wall andthe top cabinet.)Filler BlockMicrowave Oven TopEquivalentto Depthof CabinetRecessInsert 2 self-aligning screwsthrough outer top cabinetholes. Turn two full turnson each screw.Tighten centerscrew completely.Install grease filter. See the Owner’s Manualpacked with the microwave.Self-Aligning Screw512 Rotate front of ovenup against cabinetbottom.