GE 90*-30 PLC Series User Manual

Also see for 90-30 PLC: Installation and Hardware Manual

Contents

GFL-002Warnings, Cautions, and Notesas Used in this PublicationWarningWarning notices are used in this publication to emphasize that hazardous voltages,currents, temperatures, or other conditions that could cause personal injury exist in thisequipment or may be associated with its use.In situations where inattention could cause either personal injury or damage to equipment,a Warning notice is used.CautionCaution notices are used where equipment might be damaged if care is not taken.Note: Notes merely call attention to information that is especially significant tounderstanding and operating the equipment.This document is based on information available at the time of its publication. While effortshave been made to be accurate, the information contained herein does not purport to cover alldetails or variations in hardware or software, nor to provide for every possible contingency inconnection with installation, operation, or maintenance. Features may be described hereinwhich are not present in all hardware and software systems. GE Intelligent Platforms assumesno obligation of notice to holders of this document with respect to changes subsequently made.GE Intelligent Platforms makes no representation or warranty, expressed, implied, or statutorywith respect to, and assumes no responsibility for the accuracy, completeness, sufficiency, orusefulness of the information contained herein. No warranties of merchantability or fitness forpurpose shall apply.* indicates a trademark of GE Intelligent Platforms, Inc. and/or its affiliates. All othertrademarks are the property of their respective owners.©Copyright 2009 GE Intelligent Platforms, Inc.All Rights Reserved