Monitor setup6-7Changing the user modesYou can change the settings in each user mode to suit your specific needs. User modes arepredefined combinations of settings that include both general and measurement specificsettings. A user mode defines, for example, what is displayed on the screen and in the trends.General settings can be changed in the Monitor Setup menu, other settings in the parametersetup menus.To change the general settings that can be saved in user modes:Changing the Normal Screen layout on page 6-9Changing sweep speeds on page 6-13Changing parameter colors on page 6-13To change the trends and snapshot settingsConfiguring trends and snapshot on page 6-16To change the alarm limits and volumeAdjusting alarm limits on page 5-8Alarms Setup menu on page 5-6To change the parameter settingsPress a parameter key and go to the setup menu.To change the recorder and printer settingsChanging the recorder and printer settings on page 6-14Saving changes in user modesThe modifications are valid only temporarily unless you accept them by saving them in themodes:1. Press Monitor Setup key.2. Select Install/Service and enter the password.3. Select Save Modes and enter the password.4. Select the mode from the list and select Save.Temporary modifications are valid until you discharge the patient or change a mode oruntil more than 15 minutes has elapsed from the turn-off of the monitor.MonitorSetup
