GE L60 Instruction Manual

Also see for L60: Communications manual Communications guide Instruction manual Instruction manual Instruction manual

Contents

GE Multilin L60 Line Phase Comparison Relay 2-72 PRODUCT DESCRIPTION 2.1 INTRODUCTION2The order codes for replacement modules to be ordered separately are shown in the following table. When ordering areplacement CPU module or faceplate, please provide the serial number of your existing unit.Table 2–5: ORDER CODES FOR REPLACEMENT MODULESUR - ** - *POWER SUPPLY(redundant supply onlyavailable in horizontal units; mustbe same type as main supply)| 1H | 125 / 250 V AC/DC| 1L | 24 to 48 V (DC only)| RH | redundant 125 / 250 V AC/DC| RH | redundant 24 to 48 V (DC only)CPU | 9E | RS485 and RS485 (Modbus RTU, DNP 3.0)| 9G | RS485 and 10Base-F (Ethernet, Modbus TCP/IP, DNP 3.0)| 9H | RS485 and Redundant 10Base-F (Ethernet, Modbus TCP/IP, DNP 3.0)| 9J | RS485 and multi-mode ST 100Base-FX (Ethernet, Modbus TCP/IP, DNP 3.0)| 9K | RS485 and multi-mode ST redundant 100Base-FX (Ethernet, Modbus TCP/IP, DNP 3.0)| 9L | RS485 and single mode SC 100Base-FX (Ethernet, Modbus TCP/IP, DNP 3.0)| 9M | RS485 and single mode SC redundant 100Base-FX (Ethernet, Modbus TCP/IP, DNP 3.0)| 9N | RS485 and 10/100Base-T (Ethernet, Modbus TCP/IP, DNP 3.0)| 9P | RS485 and single mode ST 100Base-FX (Ethernet, Modbus TCP/IP, DNP 3.0)| 9R | RS485 and single mode ST redundant 100Base-FX (Ethernet, Modbus TCP/IP, DNP 3.0)FACEPLATE/DISPLAY | 3C | Horizontal faceplate with keypad and English display| 3P | Horizontal faceplate with keypad, user-programmable pushbuttons, and English display| 3R | Horizontal faceplate with keypad and Russian display| 3S | Horizontal faceplate with keypad, user-programmable pushbuttons, and Russian display| 3A | Horizontal faceplate with keypad and Chinese display| 3B | Horizontal faceplate with keypad, user-programmable pushbuttons, and Chinese display| 3D | Horizontal faceplate with keypad and French display| 3G | Horizontal faceplate with keypad, user-programmable pushbuttons, and French display| 3F | Vertical faceplate with keypad and English display| 3L | Vertical faceplate with keypad, user-programmable pushbuttons, and English display| 3K | Vertical faceplate with keypad and Russian display| 3M | Vertical faceplate with keypad, user-programmable pushbuttons, and Russian display| 3H | Vertical faceplate with keypad and Chinese display| 3N | Vertical faceplate with keypad, user-programmable pushbuttons, and Chinese display| 3J | Vertical faceplate with keypad and French display| 3Q | Vertical faceplate with keypad, user-programmable pushbuttons, and French displayDIGITALINPUTS/OUTPUTS| 4A | 4 Solid-State (no monitoring) MOSFET outputs| 4B | 4 Solid-State (voltage with optional current) MOSFET outputs| 4C | 4 Solid-State (current with optional voltage) MOSFET outputs| 4D | 16 digital inputs with Auto-Burnishing| 4L | 14 Form-A (no monitoring) Latching outputs| 67 | 8 Form-A (no monitoring) outputs| 6A | 2 Form-A (voltage with optional current) and 2 Form-C outputs, 8 digital inputs| 6B | 2 Form-A (voltage with optional current) and 4 Form-C outputs, 4 digital inputs| 6C | 8 Form-C outputs| 6D | 16 digital inputs| 6E | 4 Form-C outputs, 8 digital inputs| 6F | 8 Fast Form-C outputs| 6G | 4 Form-A (voltage with optional current) outputs, 8 digital inputs| 6H | 6 Form-A (voltage with optional current) outputs, 4 digital inputs| 6K | 4 Form-C and 4 Fast Form-C outputs| 6L | 2 Form-A (current with optional voltage) and 2 Form-C outputs, 8 digital inputs| 6M | 2 Form-A (current with optional voltage) and 4 Form-C outputs, 4 digital inputs| 6N | 4 Form-A (current with optional voltage) outputs, 8 digital inputs| 6P | 6 Form-A (current with optional voltage) outputs, 4 digital inputs| 6R | 2 Form-A (no monitoring) and 2 Form-C outputs, 8 digital inputs| 6S | 2 Form-A (no monitoring) and 4 Form-C outputs, 4 digital inputs| 6T | 4 Form-A (no monitoring) outputs, 8 digital inputs| 6U | 6 Form-A (no monitoring) outputs, 4 digital inputsCT/VTMODULES(NOT AVAILABLE FOR THE C30)| 8F | Standard 4CT/4VT| 8G | Sensitive Ground 4CT/4VT| 8H | Standard 8CT| 8J | Sensitive Ground 8CT| 8P | 4CT and 2 communications channelsUR INTER-RELAY COMMUNICATIONS | 2A | C37.94SM, 1300nm single-mode, ELED, 1 channel single-mode| 2B | C37.94SM, 1300nm single-mode, ELED, 2 channel single-mode| 72 | 1550 nm, single-mode, LASER, 1 Channel| 73 | 1550 nm, single-mode, LASER, 2 Channel| 74 | Channel 1 - RS422; Channel 2 - 1550 nm, single-mode, LASER| 75 | Channel 1 - G.703; Channel 2 - 1550 nm, Single-mode LASER| 76 | IEEE C37.94, 820 nm, multimode, LED, 1 Channel| 77 | IEEE C37.94, 820 nm, multimode, LED, 2 Channels| 7A | 820 nm, multi-mode, LED, 1 Channel| 7B | 1300 nm, multi-mode, LED, 1 Channel| 7C | 1300 nm, single-mode, ELED, 1 Channel| 7D | 1300 nm, single-mode, LASER, 1 Channel| 7E | Channel 1 - G.703; Channel 2 - 820 nm, multi-mode| 7F | Channel 1 - G.703; Channel 2 - 1300 nm, multi-mode| 7G | Channel 1 - G.703; Channel 2 - 1300 nm, single-mode ELED| 7H | 820 nm, multi-mode, LED, 2 Channels| 7I | 1300 nm, multi-mode, LED, 2 Channels| 7J | 1300 nm, single-mode, ELED, 2 Channels| 7K | 1300 nm, single-mode, LASER, 2 Channels| 7L | Channel 1 - RS422; Channel 2 - 820 nm, multi-mode, LED| 7M | Channel 1 - RS422; Channel 2 - 1300 nm, multi-mode, LED| 7N | Channel 1 - RS422; Channel 2 - 1300 nm, single-mode, ELED| 7P | Channel 1 - RS422; Channel 2 - 1300 nm, single-mode, LASER| 7Q | Channel 1 - G.703; Channel 2 - 1300 nm, single-mode LASER| 7R | G.703, 1 Channel| 7S | G.703, 2 Channels| 7T | RS422, 1 Channel| 7W | RS422, 2 ChannelsTRANSDUCERINPUTS/OUTPUTS | 5A | 4 dcmA inputs, 4 dcmA outputs (only one 5A module is allowed)| 5C | 8 RTD inputs| 5D | 4 RTD inputs, 4 dcmA outputs (only one 5D module is allowed)| 5E | 4 dcmA inputs, 4 RTD inputs| 5F | 8 dcmA inputs