GE L60 manuals
L60
Table of contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- INTRODUCTION
- Communication ports
- MODBUS
- Data link layer
- Modbus RTU CRC-16 algorithm
- Modbus function codes
- Execute operation (function code 05h)
- Store multiple settings (function code 10h)
- File transfers
- Memory map
- IEC 60870-5-104
- COMMUNICATION
- Data formats
- Configuring the UR using SCL
- Merge SCL file
- Configurable logical devices
- ACSI conformance statement
- ACSI services conformance statement
- Model implementation conformance statement (MICS)
- Master (root) logical device
- Protection (Prot) logical device
- Control (Ctrl) logical device
- System logical device
- Meter logical device
- General (Gen) logical device
- GE namespace
- Enumerations
- SCL implementation conformance statement (SICS)
- PIXIT conformance statement
- TICS conformance statement
- SCL logging
- SCL file storage on UR
- Troubleshooting log file errors
- Configuration process
- Configuration process with IED setup tool
- Instantiated IED capability description (IID) file
- Sample SCL files
- Annex - Optional intermediate GOOSE reception objects
- E3-2.0 implementation model for GOOSE configuration via SCL
- ICD files
- CID files
- IID files
- DNP 4.1 Device profile document
- DNP point lists
- Counters
- IEC 60870-5-103
- IEC 60870-5-104 points
L60
Table of contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- INTRODUCTION
- Communication ports
- MODBUS
- Data link layer
- Modbus RTU CRC-16 algorithm
- Modbus function codes
- Execute operation (function code 05h)
- Store multiple settings (function code 10h)
- File transfers
- Memory map
- IEC 60870-5-104
- COMMUNICATION
- Data formats
- Configuring the UR using SCL
- Merge SCL file
- Configurable logical devices
- ACSI conformance statement
- ACSI services conformance statement
- Model implementation conformance statement (MICS)
- Master (root) logical device
- Protection (Prot) logical device
- Control (Ctrl) logical device
- System logical device
- Meter logical device
- General (Gen) logical device
- GE namespace
- Enumerations
- SCL implementation conformance statement (SICS)
- PIXIT conformance statement
- TICS conformance statement
- SCL logging
- SCL file storage on UR
- Troubleshooting log file errors
- Configuration process
- Configuration process with IED setup tool
- Instantiated IED capability description (IID) file
- Sample SCL files
- Annex - Optional intermediate GOOSE reception objects
- E3-2.0 implementation model for GOOSE configuration via SCL
- ICD files
- CID files
- IID files
- DNP 4.1 Device profile document
- DNP point lists
- Counters
- IEC 60870-5-103
- IEC 60870-5-104 points
L60
Table of contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- CAUTIONS AND WARNINGS
- INTRODUCTION TO THE UR
- HARDWARE ARCHITECTURE
- SOFTWARE ARCHITECTURE
- PC REQUIREMENTS
- CONNECTING ENERVISTA UR SETUP WITH THE L60
- MOUNTING AND WIRING
- FACEPLATE KEYPAD
- RELAY ACTIVATION
- COMMISSIONING
- OVERVIEW
- ORDERING
- PROTECTION ELEMENTS
- USER-PROGRAMMABLE ELEMENTS
- MONITORING
- INPUTS
- OUTPUTS
- COMMUNICATIONS
- INTER-RELAY COMMUNICATIONS
- TYPE TESTS
- PANEL CUTOUT
- MODULE WITHDRAWAL AND INSERTION
- REAR TERMINAL LAYOUT
- TYPICAL WIRING
- DIELECTRIC STRENGTH
- CT/VT MODULES
- CONTACT INPUTS/OUTPUTS
- TRANSDUCER INPUTS/OUTPUTS
- RS232 FACEPLATE PORT
- IRIG-B
- L60 CHANNEL COMMUNICATIONS
- DESCRIPTION
- FIBER: LED AND ELED TRANSMITTERS
- G.703 INTERFACE
- RS422 INTERFACE
- RS422 AND FIBER INTERFACE
- IEEE C37.94 INTERFACE
- C37.94SM INTERFACE
- INTRODUCTION
- ENERVISTA UR SETUP SOFTWARE MAIN WINDOW
- FACEPLATE
- LED INDICATORS
- DISPLAY
- MENUS
- CHANGING SETTINGS
- SETTINGS MAIN MENU
- INTRODUCTION TO ELEMENTS
- INTRODUCTION TO AC SOURCES
- PASSWORD SECURITY
- DISPLAY PROPERTIES
- CLEAR RELAY RECORDS
- MODBUS USER MAP
- FAULT REPORTS
- OSCILLOGRAPHY
- DATA LOGGER
- USER-PROGRAMMABLE LEDS
- USER-PROGRAMMABLE SELF TESTS
- CONTROL PUSHBUTTONS
- USER-PROGRAMMABLE PUSHBUTTONS
- FLEX STATE PARAMETERS
- USER-DEFINABLE DISPLAYS
- DIRECT INPUTS/OUTPUTS
- TELEPROTECTION
- INSTALLATION
- AC INPUTS
- POWER SYSTEM
- SIGNAL SOURCES
- BREAKERS
- FLEXCURVES™
- INTRODUCTION TO FLEXLOGIC™
- FLEXLOGIC™ RULES
- FLEXLOGIC™ EXAMPLE
- FLEXLOGIC™ EQUATION EDITOR
- FLEXELEMENTS™
- NON-VOLATILE LATCHES
- LINE PICKUP
- DISTANCE
- POWER SWING DETECT
- LOAD ENCROACHMENT
- PHASE CURRENT
- NEUTRAL CURRENT
- GROUND CURRENT
- NEGATIVE SEQUENCE CURRENT
- BREAKER FAILURE
- VOLTAGE ELEMENTS
- SELECTOR SWITCH
- TRIP OUTPUT
- SYNCHROCHECK
- DIGITAL ELEMENTS
- DIGITAL COUNTERS
- MONITORING ELEMENTS
- PILOT SCHEMES
- AUTORECLOSE
- CONTACT INPUTS
- VIRTUAL INPUTS
- CONTACT OUTPUTS
- VIRTUAL OUTPUTS
- REMOTE DEVICES
- REMOTE INPUTS
- REMOTE OUTPUTS
- RESETTING
- TELEPROTECTION INPUTS/OUTPUTS
- DCMA INPUTS
- RTD INPUTS
- TEST MODE
- FORCE CONTACT OUTPUTS
- ACTUAL VALUES MAIN MENU
- TELEPROTECTION INPUTS
- DIRECT INPUTS
- TELEPROTECTION CHANNEL TESTS
- METERING CONVENTIONS
- SOURCES
- EVENT RECORDS
- BREAKER MAINTENANCE
- MODEL INFORMATION
- SET DATE AND TIME
- TARGETS MENU
- VARIATIONS IN PHASE COMPARISON SCHEMES
- BLOCKING VS. TRIPPING SCHEMES
- SINGLE VS. DUAL PHASE COMPARISON
- REFINEMENTS TO BASIC SCHEMES
- MULTI-TERMINAL LINES
- PHASE SELECTION
- USE OF SETTINGS
- SETTINGS EXAMPLE
- LINES WITH TAPPED TRANSFORMERS
- TRACTIONAL LOAD
- SENSITIVITY ISSUES
- SINGLE-POLE TRIPPING APPLICATIONS
- SECURITY ON WEAK OR NOISY PLC CHANNELS
- PHASE DISTANCE
- DISTANCE SETTINGS
- TWO BREAKER CONFIGURATION
- B.1.1 INTRODUCTION
- B.1.4 CRC-16 ALGORITHM
- B.2.1 SUPPORTED FUNCTION CODES
- B.2.3 EXECUTE OPERATION (FUNCTION CODE 05H)
- B.2.5 STORE MULTIPLE SETTINGS (FUNCTION CODE 10H)
- B.3.1 OBTAINING UR FILES VIA MODBUS
- B.3.2 MODBUS PASSWORD OPERATION
- B.4.1 MODBUS MEMORY MAP
- B.4.2 DATA FORMATS
- C.1.1 OVERVIEW
- C.1.6 COMMUNICATION SOFTWARE UTILITIES
- C.2.1 ACSI BASIC CONFORMANCE STATEMENT
- C.2.3 ACSI SERVICES CONFORMANCE STATEMENT
- C.3.1 LOGICAL NODES TABLE
- D.1.1 INTEROPERABILITY DOCUMENT
- D.1.2 POINT LIST
- E.1.1 DNP V3.00 DEVICE PROFILE
- E.1.2 IMPLEMENTATION TABLE
- E.2.1 BINARY INPUT POINTS
- E.2.2 BINARY AND CONTROL RELAY OUTPUT
- E.2.3 COUNTERS
- E.2.4 ANALOG INPUTS
- F.1.1 REVISION HISTORY
- F.2.1 STANDARD ABBREVIATIONS
- F.3.1 GE MULTILIN WARRANTY
L60
Table of contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- INTRODUCTION
- For further assistance
- PRODUCT
- DESCRIPTION
- Security
- Order codes
- Replacement modules
- Signal processing
- Specifications
- Protection elements
- User-programmable elements
- Monitoring
- Metering
- Inputs
- Power supply
- Communication protocols
- Inter-relay communications
- CyberSentry security
- Type tests
- Approvals
- INSTALLATION
- Dielectric strength
- Control power
- CT/VT modules
- Contact inputs and outputs
- Transducer inputs and outputs
- RS232 faceplate port
- CPU communication ports
- IRIG-B
- L60 channel communications
- Direct input and output communications
- Fiber: LED and ELED transmitters
- G.703 interface
- RS422 interface
- RS422 and fiber interface
- G.703 and fiber interface
- C37.94SM interface
- Activate relay
- Install software
- System requirements
- Add device to software
- Configure serial connection
- Configure Ethernet connection
- Automatic discovery of UR devices
- Connect to the L60 in EnerVista
- Use Quick Connect via the front panel RS232 port
- Set up CyberSentry and change default password
- Import settings
- Event viewing
- File support
- Protection summary window
- Settings templates
- Secure and lock FlexLogic equations
- Settings file traceability
- Front panel interface
- Front panel keypad
- Changing settings
- Faceplate
- LED indicators
- Custom LED labeling
- Breaker control
- Change passwords
- Invalid password entry
- Logic diagrams
- FlexLogic design and monitoring using Engineer
- Design logic
- Send file to and from device
- Monitor logic
- View front panel and print labels
- Generate connectivity report
- Toolbars
- Overview
- Introduction to AC sources
- Product setup
- Display properties
- Clear relay records
- Communications
- Modbus user map
- Real-time clock
- Fault reports
- Oscillography
- Data logger
- Demand
- User-programmable LEDs
- User-programmable self-tests
- Control pushbuttons
- User-programmable pushbuttons
- Flex state parameters
- User-definable displays
- Direct inputs and outputs
- Teleprotection
- Power system
- Signal sources
- Breakers
- Disconnect switches
- FlexCurves
- FlexLogic
- FlexLogic rules
- FlexLogic example
- FlexLogic equation editor
- Non-volatile latches
- Grouped elements
- Phase comparison elements
- Line pickup
- Distance
- Power swing detect (ANSI 68)
- Load encroachment
- Phase current
- Neutral current
- Wattmetric ground fault
- Ground current
- Negative sequence current
- Breaker failure (ANSI 50BF)
- Voltage elements
- Control elements
- Setting groups
- Selector switch
- Trip output
- Synchrocheck (ANSI 25)
- Digital elements
- Digital counters
- Monitoring elements
- Pilot schemes
- Autoreclose (ANSI 79)
- Inputs/outputs
- Virtual inputs
- Contact outputs
- Virtual outputs
- Transducer inputs/outputs
- RTD inputs
- DCmA outputs
- Testing
- Force contact inputs
- Actual values menu
- Front panel
- Status
- RxGOOSE statistics
- Real time clock synchronizing
- Direct devices status
- Remaining connection status
- TxGOOSE status
- Sources
- Synchrocheck
- Tracking frequency
- RxGOOSE analogs
- Records
- Event records
- Product information
- COMMANDS AND
- Set date and time
- Target messages
- APPLICATION OF
- Sensitivity issues
- Single-pole tripping applications
- Phase distance
- Ground distance
- Series compensated lines
- Understanding L60 oscillography
- Two-breaker configuration
- Fundamental principle of phase comparison
- Variations in phase comparison schemes
- Phase comparison excitation
- Blocking versus tripping schemes
- Single versus dual phase comparison
- Refinements to basic schemes
- Multi-terminal lines
- L60 signal processing
- Single-pole tripping
- Phase selection
- Fault locator
- Devices with Site Targets
- General maintenance
- CyberSentry security event files
- Compare settings
- Back up and restore settings
- Restore settings
- Upgrade software
- Upgrade firmware
- Replace module
- Battery
- Dispose of battery
- Clear files and data after uninstall
- Repairs
- A.1 FlexAnalog items
- B.1 RADIUS server configuration
- C.1 Command line interface
- D.1 Warranty
L60
Table of contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- CAUTIONS AND WARNINGS
- INSPECTION PROCEDURE
- INTRODUCTION TO THE UR
- HARDWARE ARCHITECTURE
- SOFTWARE ARCHITECTURE
- PC REQUIREMENTS
- CONFIGURING THE L60 FOR SOFTWARE ACCESS
- USING THE QUICK CONNECT FEATURE
- CONNECTING TO THE L60 RELAY
- MOUNTING AND WIRING
- FACEPLATE KEYPAD
- RELAY PASSWORDS
- COMMISSIONING
- OVERVIEW
- ORDERING
- REPLACEMENT MODULES
- PROTECTION ELEMENTS
- USER-PROGRAMMABLE ELEMENTS
- MONITORING
- METERING
- POWER SUPPLY
- COMMUNICATION PROTOCOLS
- INTER-RELAY COMMUNICATIONS
- TYPE TESTS
- APPROVALS
- PANEL CUTOUT
- REAR TERMINAL LAYOUT
- TYPICAL WIRING
- DIELECTRIC STRENGTH
- CT AND VT MODULES
- CONTACT INPUTS AND OUTPUTS
- TRANSDUCER INPUTS AND OUTPUTS
- RS232 FACEPLATE PORT
- IRIG-B
- L60 CHANNEL COMMUNICATIONS
- DESCRIPTION
- FIBER: LED AND ELED TRANSMITTERS
- G.703 INTERFACE
- RS422 INTERFACE
- RS422 AND FIBER INTERFACE
- IEEE C37.94 INTERFACE
- C37.94SM INTERFACE
- MANAGED SWITCH LED INDICATORS
- CONFIGURING THE MANAGED ETHERNET SWITCH MODULE
- UPLOADING L60 SWITCH MODULE FIRMWARE
- ETHERNET SWITCH SELF-TEST ERRORS
- INTRODUCTION
- ENERVISTA UR SETUP MAIN WINDOW
- SETTINGS TEMPLATES
- SECURING AND LOCKING FLEXLOGIC™ EQUATIONS
- SETTINGS FILE TRACEABILITY
- FACEPLATE
- LED INDICATORS
- CUSTOM LABELING OF LEDS
- DISPLAY
- MENUS
- CHANGING SETTINGS
- SETTINGS MENU
- INTRODUCTION TO ELEMENTS
- INTRODUCTION TO AC SOURCES
- SECURITY
- DISPLAY PROPERTIES
- CLEAR RELAY RECORDS
- COMMUNICATIONS
- MODBUS USER MAP
- REAL TIME CLOCK
- FAULT REPORTS
- OSCILLOGRAPHY
- DATA LOGGER
- USER-PROGRAMMABLE LEDS
- USER-PROGRAMMABLE SELF TESTS
- CONTROL PUSHBUTTONS
- USER-PROGRAMMABLE PUSHBUTTONS
- FLEX STATE PARAMETERS
- DIRECT INPUTS/OUTPUTS
- TELEPROTECTION
- INSTALLATION
- AC INPUTS
- POWER SYSTEM
- SIGNAL SOURCES
- BREAKERS
- DISCONNECT SWITCHES
- FLEXCURVES™
- INTRODUCTION TO FLEXLOGIC™
- FLEXLOGIC™ RULES
- FLEXLOGIC™ EXAMPLE
- FLEXLOGIC™ EQUATION EDITOR
- FLEXELEMENTS™
- NON-VOLATILE LATCHES
- PHASE COMPARISON ELEMENTS
- LINE PICKUP
- DISTANCE
- POWER SWING DETECT
- LOAD ENCROACHMENT
- PHASE CURRENT
- NEUTRAL CURRENT
- WATTMETRIC GROUND FAULT
- GROUND CURRENT
- NEGATIVE SEQUENCE CURRENT
- BREAKER FAILURE
- VOLTAGE ELEMENTS
- SETTING GROUPS
- SELECTOR SWITCH
- TRIP OUTPUT
- SYNCHROCHECK
- DIGITAL ELEMENTS
- DIGITAL COUNTERS
- MONITORING ELEMENTS
- PILOT SCHEMES
- AUTORECLOSE
- CONTACT INPUTS
- VIRTUAL INPUTS
- CONTACT OUTPUTS
- VIRTUAL OUTPUTS
- REMOTE DEVICES
- REMOTE INPUTS
- REMOTE DOUBLE-POINT STATUS INPUTS
- RESETTING
- DIRECT INPUTS AND OUTPUTS
- TELEPROTECTION INPUTS AND OUTPUTS
- IEC 61850 GOOSE ANALOGS
- IEC 61850 GOOSE INTEGERS
- DCMA INPUTS
- RTD INPUTS
- DCMA OUTPUTS
- TEST MODE
- FORCE CONTACT INPUTS
- FORCE CONTACT OUTPUTS
- ACTUAL VALUES MENU
- ETHERNET
- DIRECT DEVICES STATUS
- ETHERNET SWITCH
- METERING CONVENTIONS
- SOURCES
- TRACKING FREQUENCY
- TRANSDUCER INPUTS/OUTPUTS
- BREAKER MAINTENANCE
- MODEL INFORMATION
- CLEAR RECORDS
- RELAY MAINTENANCE
- TARGETS MENU
- PASSWORD SECURITY MENU
- REMOTE PASSWORDS
- ACCESS SUPERVISION
- MODIFYING USER PRIVILEGES
- VARIATIONS IN PHASE COMPARISON SCHEMES
- BLOCKING VS. TRIPPING SCHEMES
- SINGLE VS. DUAL PHASE COMPARISON
- REFINEMENTS TO BASIC SCHEMES
- MULTI-TERMINAL LINES
- L60 SIGNAL PROCESSING
- PHASE SELECTION
- FAULT TYPE DETERMINATION
- SETTINGS EXAMPLE
- LINES WITH TAPPED TRANSFORMERS
- TRACTIONAL LOAD
- SENSITIVITY ISSUES
- SINGLE-POLE TRIPPING APPLICATIONS
- PHASE DISTANCE
- GROUND DISTANCE
- DISTANCE SETTINGS
- TWO BREAKER CONFIGURATION
- REPLACE A MODULE
- REPLACE BATTERY
- DISPOSE OF BATTERY
- UNINSTALL AND CLEAR FILES AND DATA
- REPAIRS
- STORAGE
- DISPOSAL
- A.1.1 FLEXANALOG ITEMS
- A.1.2 FLEXINTEGER ITEMS
- B.1.1 INTRODUCTION
- B.1.4 MODBUS RTU CRC-16 ALGORITHM
- B.2.1 SUPPORTED FUNCTION CODES
- B.2.3 EXECUTE OPERATION (FUNCTION CODE 05H)
- B.2.5 STORE MULTIPLE SETTINGS (FUNCTION CODE 10H)
- B.3.1 OBTAINING RELAY FILES VIA MODBUS
- B.4.1 MODBUS MEMORY MAP
- B.4.2 DATA FORMATS
- C.1.1 INTRODUCTION
- C.1.3 FILE TRANSFER BY IEC 61850
- C.2.1 OVERVIEW
- C.2.6 MMXU: ANALOG MEASURED VALUES
- C.3.1 BUFFERED/UNBUFFERED REPORTING
- C.3.6 LOGICAL NODE NAME PREFIXES
- C.4.1 OVERVIEW
- C.4.5 ETHERNET MAC ADDRESS FOR GSSE/GOOSE
- C.4.6 GSSE ID AND GOOSE ID SETTINGS
- C.5.1 OVERVIEW
- C.5.2 CONFIGURING IEC 61850 SETTINGS
- C.5.3 ABOUT ICD FILES
- C.5.4 CREATING AN ICD FILE WITH ENERVISTA UR SETUP
- C.5.6 IMPORTING AN SCD FILE WITH ENERVISTA UR SETUP
- C.6.1 ACSI BASIC CONFORMANCE STATEMENT
- C.6.3 ACSI SERVICES CONFORMANCE STATEMENT
- C.7.1 LOGICAL NODES TABLE
- D.1.1 INTEROPERABILITY DOCUMENT
- D.1.2 POINT LIST
- E.1.1 DNP V3.00 DEVICE PROFILE
- E.1.2 IMPLEMENTATION TABLE
- E.2.1 BINARY INPUT POINTS
- E.2.2 BINARY AND CONTROL RELAY OUTPUT
- E.2.3 COUNTERS
- E.2.4 ANALOG INPUTS
- F.1.1 REVISION HISTORY
- F.1.2 CHANGES TO THE L60 MANUAL
- F.2.1 STANDARD ABBREVIATIONS
- F.3.1 GE MULTILIN WARRANTY
L60
Table of contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- CAUTIONS AND WARNINGS
- INTRODUCTION TO THE UR
- HARDWARE ARCHITECTURE
- SOFTWARE ARCHITECTURE
- PC REQUIREMENTS
- CONFIGURING THE L60 FOR SOFTWARE ACCESS
- USING THE QUICK CONNECT FEATURE
- CONNECTING TO THE L60 RELAY
- MOUNTING AND WIRING
- FACEPLATE KEYPAD
- BATTERY TAB
- COMMISSIONING
- OVERVIEW
- ORDERING
- REPLACEMENT MODULES
- PROTECTION ELEMENTS
- USER-PROGRAMMABLE ELEMENTS
- MONITORING
- INPUTS
- POWER SUPPLY
- COMMUNICATIONS
- INTER-RELAY COMMUNICATIONS
- TYPE TESTS
- PANEL CUTOUT
- MODULE WITHDRAWAL AND INSERTION
- REAR TERMINAL LAYOUT
- TYPICAL WIRING
- DIELECTRIC STRENGTH
- CT/VT MODULES
- CONTACT INPUTS/OUTPUTS
- TRANSDUCER INPUTS/OUTPUTS
- RS232 FACEPLATE PORT
- IRIG-B
- L60 CHANNEL COMMUNICATIONS
- DESCRIPTION
- FIBER: LED AND ELED TRANSMITTERS
- G.703 INTERFACE
- RS422 INTERFACE
- RS422 AND FIBER INTERFACE
- IEEE C37.94 INTERFACE
- C37.94SM INTERFACE
- INTRODUCTION
- ENERVISTA UR SETUP MAIN WINDOW
- FACEPLATE
- LED INDICATORS
- DISPLAY
- MENUS
- CHANGING SETTINGS
- SETTINGS MAIN MENU
- INTRODUCTION TO ELEMENTS
- INTRODUCTION TO AC SOURCES
- PASSWORD SECURITY
- DISPLAY PROPERTIES
- CLEAR RELAY RECORDS
- MODBUS USER MAP
- REAL TIME CLOCK
- FAULT REPORTS
- OSCILLOGRAPHY
- DATA LOGGER
- USER-PROGRAMMABLE LEDS
- USER-PROGRAMMABLE SELF TESTS
- CONTROL PUSHBUTTONS
- USER-PROGRAMMABLE PUSHBUTTONS
- FLEX STATE PARAMETERS
- DIRECT INPUTS/OUTPUTS
- TELEPROTECTION
- INSTALLATION
- AC INPUTS
- POWER SYSTEM
- SIGNAL SOURCES
- BREAKERS
- FLEXCURVES™
- INTRODUCTION TO FLEXLOGIC™
- FLEXLOGIC™ RULES
- FLEXLOGIC™ EQUATION EDITOR
- FLEXELEMENTS™
- NON-VOLATILE LATCHES
- PHASE COMPARISON ELEMENTS
- LINE PICKUP
- DISTANCE
- POWER SWING DETECT
- LOAD ENCROACHMENT
- PHASE CURRENT
- NEUTRAL CURRENT
- WATTMETRIC GROUND FAULT
- GROUND CURRENT
- NEGATIVE SEQUENCE CURRENT
- BREAKER FAILURE
- VOLTAGE ELEMENTS
- SELECTOR SWITCH
- TRIP OUTPUT
- SYNCHROCHECK
- DIGITAL ELEMENTS
- DIGITAL COUNTERS
- MONITORING ELEMENTS
- PILOT SCHEMES
- AUTORECLOSE
- CONTACT INPUTS
- VIRTUAL INPUTS
- CONTACT OUTPUTS
- VIRTUAL OUTPUTS
- REMOTE DEVICES
- REMOTE INPUTS
- REMOTE OUTPUTS
- RESETTING
- TELEPROTECTION INPUTS/OUTPUTS
- DCMA INPUTS
- RTD INPUTS
- TEST MODE
- FORCE CONTACT OUTPUTS
- ACTUAL VALUES MAIN MENU
- TELEPROTECTION INPUTS
- DIRECT INPUTS
- TELEPROTECTION CHANNEL TESTS
- METERING CONVENTIONS
- SOURCES
- IEC 61580 GOOSE ANALOG VALUES
- EVENT RECORDS
- BREAKER MAINTENANCE
- MODEL INFORMATION
- SET DATE AND TIME
- TARGETS MENU
- VARIATIONS IN PHASE COMPARISON SCHEMES
- BLOCKING VS. TRIPPING SCHEMES
- SINGLE VS. DUAL PHASE COMPARISON
- REFINEMENTS TO BASIC SCHEMES
- MULTI-TERMINAL LINES
- L60 SIGNAL PROCESSING
- PHASE SELECTION
- SETTINGS EXAMPLE
- LINES WITH TAPPED TRANSFORMERS
- TRACTIONAL LOAD
- SENSITIVITY ISSUES
- SINGLE-POLE TRIPPING APPLICATIONS
- SECURITY ON WEAK OR NOISY PLC CHANNELS
- PHASE DISTANCE
- DISTANCE SETTINGS
- TWO BREAKER CONFIGURATION
- B.1.1 INTRODUCTION
- B.1.4 CRC-16 ALGORITHM
- B.2.1 SUPPORTED FUNCTION CODES
- B.2.3 EXECUTE OPERATION (FUNCTION CODE 05H)
- B.2.5 STORE MULTIPLE SETTINGS (FUNCTION CODE 10H)
- B.3.1 OBTAINING RELAY FILES VIA MODBUS
- B.3.2 MODBUS PASSWORD OPERATION
- B.4.1 MODBUS MEMORY MAP
- B.4.2 DATA FORMATS
- C.1.1 INTRODUCTION
- C.2.1 OVERVIEW
- C.2.6 PROTECTION AND OTHER LOGICAL NODES
- C.3.1 BUFFERED/UNBUFFERED REPORTING
- C.3.6 LOGICAL NODE NAME PREFIXES
- C.4.1 OVERVIEW
- C.4.5 ETHERNET MAC ADDRESS FOR GSSE/GOOSE
- C.5.1 OVERVIEW
- C.5.2 CONFIGURING IEC 61850 SETTINGS
- C.5.3 ABOUT ICD FILES
- C.5.4 CREATING AN ICD FILE WITH ENERVISTA UR SETUP
- C.5.6 IMPORTING AN SCD FILE WITH ENERVISTA UR SETUP
- C.6.1 ACSI BASIC CONFORMANCE STATEMENT
- C.6.3 ACSI SERVICES CONFORMANCE STATEMENT
- C.7.1 LOGICAL NODES TABLE
- D.1.2 POINT LIST
- E.1.1 DNP V3.00 DEVICE PROFILE
- E.1.2 IMPLEMENTATION TABLE
- E.2.1 BINARY INPUT POINTS
- E.2.2 BINARY AND CONTROL RELAY OUTPUT
- E.2.3 COUNTERS
- E.2.4 ANALOG INPUTS
- F.1.1 REVISION HISTORY
- F.2.1 STANDARD ABBREVIATIONS
- F.3.1 GE MULTILIN WARRANTY
L60
Table of contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- CAUTIONS AND WARNINGS
- INSPECTION PROCEDURE
- INTRODUCTION TO THE UR
- SOFTWARE ARCHITECTURE
- PC REQUIREMENTS
- CONFIGURING THE L60 FOR SOFTWARE ACCESS
- USING THE QUICK CONNECT FEATURE
- CONNECTING TO THE L60 RELAY
- MOUNTING AND WIRING
- FACEPLATE KEYPAD
- RELAY PASSWORDS
- COMMISSIONING
- OVERVIEW
- ORDERING
- REPLACEMENT MODULES
- PROTECTION ELEMENTS
- USER-PROGRAMMABLE ELEMENTS
- MONITORING
- METERING
- POWER SUPPLY
- COMMUNICATION PROTOCOLS
- INTER-RELAY COMMUNICATIONS
- TYPE TESTS
- APPROVALS
- PANEL CUTOUT
- REAR TERMINAL LAYOUT
- TYPICAL WIRING
- DIELECTRIC STRENGTH
- CT AND VT MODULES
- CONTACT INPUTS AND OUTPUTS
- TRANSDUCER INPUTS AND OUTPUTS
- RS232 FACEPLATE PORT
- IRIG-B
- L60 CHANNEL COMMUNICATIONS
- DESCRIPTION
- FIBER: LED AND ELED TRANSMITTERS
- G.703 INTERFACE
- RS422 INTERFACE
- RS422 AND FIBER INTERFACE
- IEEE C37.94 INTERFACE
- C37.94SM INTERFACE
- INTRODUCTION
- ENERVISTA UR SETUP MAIN WINDOW
- SETTINGS TEMPLATES
- SECURING AND LOCKING FLEXLOGIC EQUATIONS
- SETTINGS FILE TRACEABILITY
- FACEPLATE
- LED INDICATORS
- CUSTOM LABELING OF LEDS
- DISPLAY
- MENUS
- CHANGING SETTINGS
- SETTINGS MENU
- INTRODUCTION TO ELEMENTS
- INTRODUCTION TO AC SOURCES
- SECURITY
- CYBERSENTRY SECURITY
- DISPLAY PROPERTIES
- CLEAR RELAY RECORDS
- COMMUNICATIONS
- MODBUS USER MAP
- REAL TIME CLOCK
- FAULT REPORTS
- OSCILLOGRAPHY
- DATA LOGGER
- USER-PROGRAMMABLE LEDS
- USER-PROGRAMMABLE SELF TESTS
- USER-PROGRAMMABLE PUSHBUTTONS
- FLEX STATE PARAMETERS
- DIRECT INPUTS/OUTPUTS
- TELEPROTECTION
- INSTALLATION
- AC INPUTS
- POWER SYSTEM
- SIGNAL SOURCES
- BREAKERS
- DISCONNECT SWITCHES
- FLEXCURVES
- INTRODUCTION TO FLEXLOGIC
- FLEXLOGIC RULES
- FLEXLOGIC EXAMPLE
- FLEXLOGIC EQUATION EDITOR
- FLEXELEMENTS
- NON-VOLATILE LATCHES
- PHASE COMPARISON ELEMENTS
- LINE PICKUP
- DISTANCE
- POWER SWING DETECT
- LOAD ENCROACHMENT
- PHASE CURRENT
- NEUTRAL CURRENT
- WATTMETRIC GROUND FAULT
- GROUND CURRENT
- NEGATIVE SEQUENCE CURRENT
- BREAKER FAILURE
- VOLTAGE ELEMENTS
- SETTING GROUPS
- SELECTOR SWITCH
- TRIP OUTPUT
- SYNCHROCHECK
- DIGITAL ELEMENTS
- DIGITAL COUNTERS
- MONITORING ELEMENTS
- PILOT SCHEMES
- AUTORECLOSE
- CONTACT INPUTS
- VIRTUAL INPUTS
- CONTACT OUTPUTS
- VIRTUAL OUTPUTS
- REMOTE DEVICES
- REMOTE INPUTS
- REMOTE DOUBLE-POINT STATUS INPUTS
- RESETTING
- DIRECT INPUTS AND OUTPUTS
- TELEPROTECTION INPUTS AND OUTPUTS
- IEC 61850 GOOSE ANALOGS
- IEC 61850 GOOSE INTEGERS
- DCMA INPUTS
- RTD INPUTS
- DCMA OUTPUTS
- TEST MODE
- FORCE CONTACT INPUTS
- FORCE CONTACT OUTPUTS
- ACTUAL VALUES MENU
- FLEX STATES
- DIRECT INPUTS
- DIRECT DEVICES STATUS
- REMAINING CONNECTION STATUS
- METERING CONVENTIONS
- SOURCES
- TRACKING FREQUENCY
- TRANSDUCER INPUTS/OUTPUTS
- BREAKER MAINTENANCE
- MODEL INFORMATION
- CLEAR RECORDS
- RELAY MAINTENANCE
- TARGETS MENU
- MODIFYING USER PRIVILEGES
- PASSWORD REQUIREMENTS
- SECURITY MENU
- VARIATIONS IN PHASE COMPARISON SCHEMES
- BLOCKING VS. TRIPPING SCHEMES
- SINGLE VS. DUAL PHASE COMPARISON
- REFINEMENTS TO BASIC SCHEMES
- MULTI-TERMINAL LINES
- L60 SIGNAL PROCESSING
- PHASE SELECTION
- FAULT TYPE DETERMINATION
- SETTINGS EXAMPLE
- LINES WITH TAPPED TRANSFORMERS
- TRACTIONAL LOAD
- SENSITIVITY ISSUES
- SINGLE-POLE TRIPPING APPLICATIONS
- PHASE DISTANCE
- GROUND DISTANCE
- DISTANCE SETTINGS
- TWO BREAKER CONFIGURATION
- REPLACE A MODULE
- REPLACE BATTERY
- DISPOSE OF BATTERY
- UNINSTALL AND CLEAR FILES AND DATA
- REPAIRS
- STORAGE
- DISPOSAL
- A.1.1 FLEXANALOG ITEMS
- A.1.2 FLEXINTEGER ITEMS
- B.1.1 INTRODUCTION
- B.1.4 MODBUS RTU CRC-16 ALGORITHM
- B.2.1 SUPPORTED FUNCTION CODES
- B.2.3 EXECUTE OPERATION (FUNCTION CODE 05H)
- B.2.5 STORE MULTIPLE SETTINGS (FUNCTION CODE 10H)
- B.3.1 OBTAINING RELAY FILES VIA MODBUS
- B.4.1 MODBUS MEMORY MAP
- B.4.2 DATA FORMATS
- C.1.1 INTRODUCTION
- C.1.3 FILE TRANSFER BY IEC 61850
- C.2.1 OVERVIEW
- C.2.6 MMXU: ANALOG MEASURED VALUES
- C.3.1 BUFFERED/UNBUFFERED REPORTING
- C.3.6 LOGICAL NODE NAME PREFIXES
- C.4.1 OVERVIEW
- C.4.5 ETHERNET MAC ADDRESS FOR GSSE/GOOSE
- C.5.1 OVERVIEW
- C.5.2 CONFIGURING IEC 61850 SETTINGS
- C.5.3 ABOUT ICD FILES
- C.5.4 CREATING AN ICD FILE WITH ENERVISTA UR SETUP
- C.5.6 IMPORTING AN SCD FILE WITH ENERVISTA UR SETUP
- C.6.1 ACSI BASIC CONFORMANCE STATEMENT
- C.6.3 ACSI SERVICES CONFORMANCE STATEMENT
- C.7.1 LOGICAL NODES TABLE
- D.1.1 INTEROPERABILITY DOCUMENT
- D.1.2 POINT LIST
- E.1.1 DNP V3.00 DEVICE PROFILE
- E.1.2 IMPLEMENTATION TABLE
- E.2.1 BINARY INPUT POINTS
- E.2.2 BINARY AND CONTROL RELAY OUTPUT
- E.2.3 COUNTERS
- E.2.4 ANALOG INPUTS
- F.1.1 REVISION HISTORY
- F.1.2 CHANGES TO THE L60 MANUAL
- F.2.1 STANDARD ABBREVIATIONS
- F.3.1 GE MULTILIN WARRANTY
L60
Table of contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- CAUTIONS AND WARNINGS
- INSPECTION PROCEDURE
- INTRODUCTION TO THE UR
- SOFTWARE ARCHITECTURE
- PC REQUIREMENTS
- CONFIGURING THE L60 FOR SOFTWARE ACCESS
- USING THE QUICK CONNECT FEATURE
- CONNECTING TO THE L60 RELAY
- SETTING UP CYBERSENTRY AND CHANGING DEFAULT PASSWORD
- MOUNTING AND WIRING
- FACEPLATE KEYPAD
- RELAY PASSWORDS
- COMMISSIONING
- OVERVIEW
- SECURITY
- ORDERING
- REPLACEMENT MODULES
- PROTECTION ELEMENTS
- USER-PROGRAMMABLE ELEMENTS
- MONITORING
- METERING
- POWER SUPPLY
- COMMUNICATION PROTOCOLS
- INTER-RELAY COMMUNICATIONS
- TYPE TESTS
- APPROVALS
- PANEL CUTOUT
- REAR TERMINAL LAYOUT
- TYPICAL WIRING
- DIELECTRIC STRENGTH
- CT AND VT MODULES
- CONTACT INPUTS AND OUTPUTS
- TRANSDUCER INPUTS AND OUTPUTS
- RS232 FACEPLATE PORT
- IRIG-B
- L60 CHANNEL COMMUNICATIONS
- DESCRIPTION
- FIBER: LED AND ELED TRANSMITTERS
- G.703 INTERFACE
- RS422 INTERFACE
- RS422 AND FIBER INTERFACE
- IEEE C37.94 INTERFACE
- C37.94SM INTERFACE
- INTRODUCTION
- ENERVISTA UR SETUP MAIN WINDOW
- SETTINGS TEMPLATES
- SECURING AND LOCKING FLEXLOGIC EQUATIONS
- SETTINGS FILE TRACEABILITY
- FACEPLATE
- LED INDICATORS
- CUSTOM LABELING OF LEDS
- DISPLAY
- MENUS
- CHANGING SETTINGS
- SETTINGS MENU
- INTRODUCTION TO ELEMENTS
- INTRODUCTION TO AC SOURCES
- DISPLAY PROPERTIES
- CLEAR RELAY RECORDS
- COMMUNICATIONS
- MODBUS USER MAP
- REAL TIME CLOCK
- FAULT REPORTS
- OSCILLOGRAPHY
- DATA LOGGER
- USER-PROGRAMMABLE LEDS
- USER-PROGRAMMABLE SELF TESTS
- USER-PROGRAMMABLE PUSHBUTTONS
- FLEX STATE PARAMETERS
- DIRECT INPUTS/OUTPUTS
- TELEPROTECTION
- INSTALLATION
- AC INPUTS
- POWER SYSTEM
- SIGNAL SOURCES
- BREAKERS
- DISCONNECT SWITCHES
- FLEXCURVES
- INTRODUCTION TO FLEXLOGIC
- FLEXLOGIC RULES
- FLEXLOGIC EXAMPLE
- FLEXLOGIC EQUATION EDITOR
- FLEXELEMENTS
- NON-VOLATILE LATCHES
- PHASE COMPARISON ELEMENTS
- LINE PICKUP
- DISTANCE
- POWER SWING DETECT
- LOAD ENCROACHMENT
- PHASE CURRENT
- NEUTRAL CURRENT
- WATTMETRIC GROUND FAULT
- GROUND CURRENT
- NEGATIVE SEQUENCE CURRENT
- BREAKER FAILURE
- VOLTAGE ELEMENTS
- SETTING GROUPS
- SELECTOR SWITCH
- TRIP OUTPUT
- SYNCHROCHECK
- DIGITAL ELEMENTS
- DIGITAL COUNTERS
- MONITORING ELEMENTS
- PILOT SCHEMES
- AUTORECLOSE
- CONTACT INPUTS
- VIRTUAL INPUTS
- CONTACT OUTPUTS
- VIRTUAL OUTPUTS
- REMOTE DEVICES
- REMOTE INPUTS
- REMOTE DOUBLE-POINT STATUS INPUTS
- RESETTING
- DIRECT INPUTS AND OUTPUTS
- TELEPROTECTION INPUTS AND OUTPUTS
- IEC 61850 GOOSE ANALOGS
- IEC 61850 GOOSE INTEGERS
- DCMA INPUTS
- RTD INPUTS
- DCMA OUTPUTS
- TEST MODE
- FORCE CONTACT INPUTS
- FORCE CONTACT OUTPUTS
- ACTUAL VALUES MENU
- FLEX STATES
- DIRECT INPUTS
- DIRECT DEVICES STATUS
- REMAINING CONNECTION STATUS
- METERING CONVENTIONS
- SOURCES
- TRACKING FREQUENCY
- TRANSDUCER INPUTS/OUTPUTS
- BREAKER MAINTENANCE
- MODEL INFORMATION
- CLEAR RECORDS
- RELAY MAINTENANCE
- TARGETS MENU
- VARIATIONS IN PHASE COMPARISON SCHEMES
- BLOCKING VS. TRIPPING SCHEMES
- SINGLE VS. DUAL PHASE COMPARISON
- REFINEMENTS TO BASIC SCHEMES
- MULTI-TERMINAL LINES
- L60 SIGNAL PROCESSING
- PHASE SELECTION
- FAULT TYPE DETERMINATION
- SETTINGS EXAMPLE
- LINES WITH TAPPED TRANSFORMERS
- TRACTIONAL LOAD
- SENSITIVITY ISSUES
- SINGLE-POLE TRIPPING APPLICATIONS
- PHASE DISTANCE
- GROUND DISTANCE
- DISTANCE SETTINGS
- TWO BREAKER CONFIGURATION
- REPLACE A MODULE
- REPLACE BATTERY
- DISPOSE OF BATTERY
- UNINSTALL AND CLEAR FILES AND DATA
- REPAIRS
- STORAGE
- DISPOSAL
- A.1.1 FLEXANALOG ITEMS
- A.1.2 FLEXINTEGER ITEMS
- B.1.1 INTRODUCTION
- B.1.4 MODBUS RTU CRC-16 ALGORITHM
- B.2.1 SUPPORTED FUNCTION CODES
- B.2.3 EXECUTE OPERATION (FUNCTION CODE 05H)
- B.2.5 STORE MULTIPLE SETTINGS (FUNCTION CODE 10H)
- B.3.1 OBTAINING RELAY FILES VIA MODBUS
- B.4.1 MODBUS MEMORY MAP
- C.1.1 INTRODUCTION
- C.1.3 FILE TRANSFER BY IEC 61850
- C.2.1 OVERVIEW
- C.2.6 MMXU: ANALOG MEASURED VALUES
- C.3.1 BUFFERED/UNBUFFERED REPORTING
- C.3.6 LOGICAL NODE NAME PREFIXES
- C.4.1 OVERVIEW
- C.4.5 ETHERNET MAC ADDRESS FOR GSSE/GOOSE
- C.5.1 OVERVIEW
- C.5.2 CONFIGURING IEC 61850 SETTINGS
- C.5.3 ABOUT ICD FILES
- C.5.4 CREATING AN ICD FILE WITH ENERVISTA UR SETUP
- C.5.6 IMPORTING AN SCD FILE WITH ENERVISTA UR SETUP
- C.6.1 ACSI BASIC CONFORMANCE STATEMENT
- C.6.3 ACSI SERVICES CONFORMANCE STATEMENT
- C.7.1 LOGICAL NODES TABLE
- D.1.1 INTEROPERABILITY DOCUMENT
- D.1.2 POINT LIST
- E.1.1 DNP V3.00 DEVICE PROFILE
- E.1.2 IMPLEMENTATION TABLE
- E.2.1 BINARY INPUT POINTS
- E.2.2 BINARY AND CONTROL RELAY OUTPUT
- E.2.3 COUNTERS
- E.2.4 ANALOG INPUTS
- F.1.1 RADIUS SERVER CONFIGURATION
- G.1.1 REVISION HISTORY
- G.1.2 CHANGES TO THE L60 MANUAL
- G.2.1 STANDARD ABBREVIATIONS
- G.3.1 GE MULTILIN WARRANTY
L60
Table of contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- INTRODUCTION
- For further assistance
- PRODUCT
- DESCRIPTION
- Security
- Order codes
- Replacement modules
- Signal processing
- Specifications
- Protection elements
- User-programmable elements
- Monitoring
- Metering
- Inputs
- Power supply
- Communication protocols
- Inter-relay communications
- CyberSentry security
- Type tests
- Production tests
- INSTALLATION
- Typical wiring
- Control power
- CT/VT modules
- Contact inputs and outputs
- Transducer inputs and outputs
- RS232 port
- CPU communication ports
- IRIG-B
- L60 channel communications
- Direct input and output communications
- Fiber: LED and ELED transmitters
- G.703 interface
- RS422 interface
- RS422 and fiber interface
- G.703 and fiber interface
- C37.94SM interface
- Activate relay
- Install software
- System requirements
- Add device to software
- Set IP address in UR
- Configure serial connection
- Configure Ethernet connection
- Automatic discovery of UR devices
- Connect to the L60 in EnerVista
- Use Quick Connect via front RS232 port
- Use Quick Connect via a rear Ethernet port
- Import settings
- Connect to D400 gateway
- Setting files
- Event viewing
- File support
- Protection summary window
- Settings templates
- Secure and lock FlexLogic equations
- Settings file traceability
- Front panel interface
- Front panel display
- Front panel navigation keys
- LED indicators
- Front panel labelling
- Menu navigation
- Change settings
- View actual values
- Breaker control
- Change passwords
- Invalid password entry
- Logic diagrams
- FlexLogic design using Engineer
- Design logic
- Send file to and from device
- Monitor logic
- View front panel and print labels
- Generate connectivity report
- Toolbars
- Overview
- Introduction to AC sources
- Product setup
- Display properties
- Graphical front panel
- Clear relay records
- Communications
- Modbus user map
- Fault reports
- Oscillography
- Data logger
- Demand
- User-programmable LEDs
- User-programmable self-tests
- Control pushbuttons
- User-programmable pushbuttons
- Flex state parameters
- User-definable displays
- Direct inputs and outputs
- Teleprotection
- Power system
- Signal sources
- Breakers
- Disconnect switch control
- FlexCurves
- FlexLogic
- FlexLogic rules
- FlexLogic evaluation
- FlexLogic equation editor
- Non-volatile latches
- Grouped elements
- Phase comparison elements
- Line pickup
- Distance
- Power swing detect (ANSI 68)
- Load encroachment
- Phase current
- Neutral current
- Wattmetric ground fault
- Ground current
- Negative sequence current
- Breaker failure (ANSI 50BF)
- Voltage elements
- Control elements
- Setting groups
- Selector switch
- Trip output
- Synchrocheck (ANSI 25)
- Digital elements
- Digital counters
- Monitoring elements
- Pilot schemes
- Autoreclose (ANSI 79)
- Inputs/outputs
- Virtual inputs
- Contact outputs
- Virtual outputs
- Transducer inputs/outputs
- RTD inputs
- DCmA outputs
- Testing
- Force contact inputs
- Front panel
- RxGOOSE boolean inputs
- Autoreclose
- Flex States
- Direct inputs
- Direct devices status
- Parallel Redundancy Protocol (PRP)
- Sources
- Synchrocheck
- Tracking frequency
- RxGOOSE analogs
- Records
- Event records
- Breaker maintenance
- Firmware revisions
- COMMANDS AND
- Set date and time
- Targets menu
- Relay self-tests
- APPLICATION OF
- Settings example
- Distance/backup supervision
- Lines with tapped transformers
- Transformer load currents
- Tractional load
- Single-pole tripping applications
- Phase distance
- Ground distance
- Series compensated lines
- Understanding L60 oscillography
- Two-breaker configuration
- Fundamental principle of phase comparison
- Variations in phase comparison schemes
- Phase comparison excitation
- Blocking versus tripping schemes
- Single versus dual phase comparison
- Refinements to basic schemes
- Multi-terminal lines
- L60 signal processing
- Single-pole tripping
- Phase selection
- Fault locator
- Devices with Site Targets
- General maintenance
- CyberSentry security event files
- Convert device settings
- Copy settings to other device
- Compare two devices
- Restore settings
- Upgrade software
- Upgrade firmware
- Replace front panel
- Replace module
- Battery
- Dispose of battery
- Clear files and data after uninstall
- Storage
- A.1 FlexAnalog items
- B.1 RADIUS server configuration
- C.1 Command line interface
- D.1 Warranty
manualsdatabase
Your AI-powered manual search engine