GE Multilin L60 Line Phase Comparison Relay 6-76 ACTUAL VALUES 6.2 STATUS66.2.13 DIRECT INPUTSPATH: ACTUAL VALUES Ö STATUS ÖØ DIRECT INPUTSThe AVERAGE MSG RETURN TIME is the time taken for direct output messages to return to the sender in a direct input/outputring configuration (this value is not applicable for non-ring configurations). This is a rolling average calculated for the last 10messages. There are two return times for dual-channel communications modules.The UNRETURNED MSG COUNT values (one per communications channel) count the direct output messages that do notmake the trip around the communications ring. The CRC FAIL COUNT values (one per communications channel) count thedirect output messages that have been received but fail the CRC check. High values for either of these counts may indicateon a problem with wiring, the communication channel, or the relay(s). The UNRETURNED MSG COUNT and CRC FAIL COUNTvalues can be cleared using the CLEAR DIRECT I/O COUNTERS command.The DIRECT INPUT x values represent the state of the x-th direct input.6.2.14 DIRECT DEVICES STATUSPATH: ACTUAL VALUES Ö STATUS ÖØ DIRECT DEVICES STATUSThese actual values represent the state of direct devices 1 through 16. DIRECT INPUTSAVG MSG RETURNTIME CH1: 0 msMESSAGE UNRETURNED MSGCOUNT CH1: 0MESSAGE CRC FAIL COUNTCH1: 0MESSAGE AVG MSG RETURNTIME CH2: 0 msMESSAGE UNRETURNED MSGCOUNT CH2: 0MESSAGE CRC FAIL COUNTCH2: 0MESSAGE DIRECT INPUT 1:On↓MESSAGE DIRECT INPUT :On DIRECT DEVICES STATUSDIRECT DEVICE 1STATUS: OfflineMESSAGE DIRECT DEVICE 2STATUS: Offline↓MESSAGE DIRECT DEVICE 16STATUS: Offline
