5-168 L90 LINE CURRENT DIFFERENTIAL SYSTEM – INSTRUCTION MANUALFLEXLOGIC CHAPTER 5: SETTINGS5R-SV CB1 DEST IP — This is the destination multicast IP address that is entered in Standard IPV4 address format. The validrange for IPv4 is from 224.0.0.0 to 239.255.255.255. The UR does not test the address entered.R-SV CB1 SECURITY — This setting selects the level of security and authentication used, as outlined in the following table,and is in the form of an enumeration as per standard. The range is 0 to 2.Table 5-21: Security5.6 FlexLogic5.6.1 FlexLogic operandsFor flexibility, the arrangement of internal digital logic combines fixed and user-programmed parameters. Logic uponwhich individual features are designed is fixed, and all other logic, from contact input signals through elements orcombinations of elements to contact outputs, is variable. The user has complete control of all variable logic throughFlexLogic. In general, the system receives analog and digital inputs that it uses to produce analog and digital outputs. Thefigure shows major subsystems of a generic UR-series relay involved in this process.Shaded settings in the table are not supported in firmware 7.0.Enumeration Authentication Encryption0 No No1 Yes No2 Yes Yes
