CHAPTER 6: ACTUAL VALUES RECORDSM60 MOTOR PROTECTION SYSTEM – INSTRUCTION MANUAL 6-2366.4.10 Transducer inputs and outputs6.4.10.1 RTD and DCmA inputsACTUAL VALUES METERING TRANSDUCER I/O DCMA INPUTS DCMA INPUT xxActual values for each DCmA input channel that is enabled are displayed with the top line as the programmed channel IDand the bottom line as the value followed by the programmed units.ACTUAL VALUES METERING TRANSDUCER I/O RTD INPUTS RTD INPUT xxActual values for each RTD input channel that is enabled are displayed with the top line as the programmed channel IDand the bottom line as the value.6.4.10.2 RRTD inputsACTUAL VALUES METERING TRANSDUCER I/O RRTD INPUTS RRTD INPUT 1(12)Actual values for each RRTD input channel that is enabled are displayed this menu. The top line the programmed RRTD IDand the bottom line displays the metered value.6.5 Records6.5.1 User-programmable fault reportsACTUAL VALUES RECORDS USER-PROGRAMMABLE FAULT REPORTSThis menu displays the user-programmable fault report actual values. See the User-Programmable Fault Report section inchapter 5 for information on this feature.6.5.2 Starting recordsACTUAL VALUES RECORDS STARTING RECORDS MOTOR START 1(5) DCMA INPUT xx DCMA INPUT xx0.000 mA RTD INPUT xx RTD INPUT xx-50 °C RRTD INPUT 1 RRTD INPUT 1-50°C USER-PROGRAMMABLE FAULT REPORTS NEWEST RECORDNUMBER: 0 LAST CLEARED DATE:2002/8/11 14:23:57 LAST REPORT DATE:2002/10/09 08:25:27NO STARTING RECORDSTO REPORTor MOTOR START 1 START 1 DATE:2002/08/11Range: Date in format YYYY/MM/DD START 1 TIME:00:00:00.000000Range: Time in format HH:MM:SS.ssssss
