Masoneilan SVI II ESD Installation and Maintenance Manual =| 109© 2016 General Electric Company. All rights reserved.PST CONF (VIEW DATA) MenuThere are two instances of PST CONF (PST CONFiguration) contained in the display menus; oneinstance can only be accessed from VIEW DATA, the other instance is accessed throughSETUP. PST CONF only displays the PST configuration data when accessed from VIEW DATA.NOTE If you would like to configure Partial Stroke Testing (PST) refer to“PST Configuration” on page 116.The PST configuration parameters viewable by pressing + and - are: TRAVEL PMIN: Pressure Units (PSI, BAR, KPA) MAX TIME RAMPSPEEDViewing PST Configuration ParametersTo view PST configuration parameters use the following procedure:1. If in NORMAL operating mode, press any button.2. Press + to move through the options until you reach VIEW DATA menu item.3. Press * to go to VIEW DATA menu (This leaves the valve in NORMAL mode.). If in MANUALmode, press + repeatedly until VIEW DATA menu item is reached. Press * to select VIEWDATA mode.4. In VIEW DATA menu, press + repeatedly until the PST CONF menu item is reached. Press *to select PST CONF mode.
