© 2016 General Electric Company. All rights reserved.112 | =GE Oil & GasFigure 69 FAILSAFE MenuHandheld CommunicatorAn alternative digital interface to SVI II ESD is the HART ® handheld communicator. In order tocommunicate with a HART® protocol compliant field device, the Device Description Languagehas to be used. A dedicated Device Description, DD, is published by registration with theHART ® Communication Foundation. When the DD is installed in a host communication devicethen it can readily access all the information in the smart field device. The SVI II ESD registeredDD is available from HART® Communication Foundation when it next publishes the HART® DD.The SVI II ESD DD can be obtained from the factory or by contacting your local representative.WARNING Do not connect a HART® modem and PC to a control circuit unlessthe controller is HART® compatible or has a HART® filter. Loss ofcontrol or a process upset can occur if the controller output circuitis not compatible with HART® signal.Do not Connect a PC or HART® modem to an intrinsically safecircuit except on the safe area side of the barrier. Do not operate aPC in a hazardous area without compliance to local and plantregulations.RESET+ +FAILSAFE MenuFAILSAFE*CLR ERR+ +VIEW ERRMANUAL MODEMANUALCYCLING MENUInstantAction***Pressing *displays the firsterror, pressing againdisplays the second error.Keep pressing to display all errorsuntil VIEW ERR appears.WAITQuickly Flashes
