1.1.7 Extract Settings From a Device 2971.1.8 Extract a PSL File From a Device 2971.1.9 Extract a DNP3 File From a Device 2981.1.10 Extract an Events File From a Device 2981.1.11 Extract a Disturbance Record From a Device 2981.2 PSL Editor 2981.3 IEC 61850 Configurator 2981.4 DNP3 Configurator 2981.5 Curve Tool 2991.6 S&R Courier 2991.7 AEDR2 2991.8 WinAEDR2 2991.9 Wavewin 2991.10 Device (Menu) Text Editor 3001.11 Event Viewer 3001.12 GOOSE Editor 3001.13 PRP Configurator 3001.14 RSTP Configurator 3001.15 Switch Manager 301Chapter 11 Busbar Commissioning Tool 3031 P747 Busbar Commissioning Tool (Remote HMI) 3052 Scheme Editor 3062.1 Connections 3062.1.1 Manual Connections 3062.1.2 Automatic Connections 3062.1.3 Remove Connection 3072.2 Scheme Elements 3072.2.1 Add Elements to a Scheme 3072.2.2 Remove an Element 3072.2.3 Group Elements in a Scheme 3072.2.4 Rotate Elements in a Group 3072.3 Working with Text on the Scheme 3072.3.1 Add a Label to an Element 3082.3.2 Remove a Label From an Element 3082.3.3 Change an Element's Label 3082.3.4 Add or Remove Free Text 3082.3.5 Validate a Scheme 3083 Protection Data Monitor 3093.1 Connect to the IED 3093.1.1 Polling Timer 3093.1.2 Read IED Data 3093.1.3 Measurements Data 309Chapter 12 Scheme Logic 3111 Chapter Overview 3132 Introduction to the Scheme Logic 3143 Fixed Scheme Logic 3163.1 Any Start Logic 3173.2 VTS Acceleration Indication Logic 3183.3 CB Fail SEF Protection Logic 3183.4 CB Fail Non Current Protection Logic 3193.5 Composite Earth Fault Start Logic 3203.6 Any Trip Logic 3203.7 SEF Any Start Logic 3204 Programmable Scheme Logic 321Contents MiCOM P747viii P747-TM-EN-1
