Section 10 — Create, Edit, and Delete Items201Change SensorIf required you can change the sensor assigned to the parameter set. Todo this:1. Press Sensor Setup.2. Press Change Sensor beside your measuring channel > Select adifferent sensor.3. Press Create New Sensor to define a new sensor.MORE: See Define and Edit Sensor.4. Press Select as Default to select the sensor you wish to use forschedule entries sent from Ascent.5. Press the key on the left beside your chosen channel to enable it (ifrequired).6. Press twice to return to the Record Review menu.Add Structure to Existing MachineYou can add structures to an existing machine structure. To do this:1. Press or Record Review on the main menu.2. Press on the main menu to display your machines.3. Use the arrow keys on the left to select a machine.4. Press repeatedly to expand the machine so its points andother lower level items display.5. Select the machine, point, or location where you wish to add thenew structure.6. Press to display the machine creation icons.7. Press the appropriate key beside each icon to create that item.
