Gaggenau BM 450 Use And Care Manual

Also see for 400 Series: Use & care manual Use and care manual Quick start guide Assembly instructions Quick start guide

23Completing initial set-up"Initial set-up complete" appears in the display.Confirm with ™.The appliance enters the standby mode and thestandby display appears. The appliance is now readyfor operation.Heating up the ovenEnsure that no packaging remnants have been left inthe cooking compartment.To remove the new cooker smell, heat up the ovenwhen it is empty and closed. An hour with ConvectionBroil R at 390°F (200°C) is ideal for this purpose.For instructions on how to set this type of heating,refer to the Oven section.Cleaning accessoriesBefore using accessories for the first time, thoroughlyclean them with hot soapy water and a soft dish cloth.Activating the applianceStandbyThe appliance is in standby mode if no function is setor the child lock is activated.The brightness of the control panel is dimmed instandby mode.Notes‒ There are various indicators for standby mode.Pre-set is the GAGGENAU logo and the time. Ifyou would like to change the display, see thesection on Basic settings.‒ The brightness of the display depends on thevertical viewing angle. You can even out thedisplay using the "Brightness" setting in the basicsettings.Activate applianceIn order to exit standby mode, you can either▯ Set the function selector,▯ Touch a control panel,▯ or open or close the door.Now you can set the desired function. Read theappropriate chapters to learn how to set functions.Notes‒ If "Standby screen = off" is selected in the basicsetting, you must turn the function selector to exitthe standby mode.‒ The standby display appears again if you have notmade any settings for a long while after activation.‒ The cooking compartment lighting goes out aftera little while if the door is open.,QLWLDOVHWXSFRPSOHWH