Gaggenau BO420 2 Series User Manual And Installation Instructions

Also see for BO 420 2 Series: Instruction manual Instruction manual

Before using for the first time en116 Before using for the first timeConfigure the settings for initial start-up. Clean the ap-pliance and accessories.6.1 Initial useImplement the settings for initial use before using yourappliance.First read the information under safety → Page 2.The appliance must be installed and connected.After connecting the appliance to the power supply, theGAGGENAU logo appears for approx. 30 seconds andthen the appliance displays the "Initial settings" menu.You can configure your new appliance for initial use.The "Initial settings" menu appears only after the appli-ance has been connected to a power supply andswitched on for the first time, or if the appliance hasnot been connected to a power supply for a number ofdays.You can change all of the settings in the basic settings→ Page 17.Setting the languageRequirement: The display shows the preset language.1. Use the rotary selector to select the required displaylanguage.2. Press to confirm.Setting the time formatRequirement: The display shows the possible formats24h and AM/PM. 24h is preset.1. Use the rotary selector to set the required format.2. Press to confirm.Set the timeRequirement: The display shows the time.1. Use the rotary selector to set the required time.2. Press to confirm.Setting the date formatRequirement: The display shows the possible formatsD.M.Y, D/M/Y and M/D/Y. D.M.Y is preset.1. Use the rotary selector to set the required format.2. Press to confirm.Setting the dateRequirement: The display shows the preset date. Thedaily setting is already active.1. Use the rotary selector to set the required day.2. Press to switch to the month setting.3. Use the rotary selector to set the month.4. Press to switch to the year setting.5. Turn the rotary selector to set the year.6. Press to confirm.Setting the temperature unitRequirement: The display shows the possible units °Cand °F. The unit °C is preset.1. Turn the rotary selector to set the required unit.2. Press to confirm.Ending the initial useRequirement: The display shows "Initial set-up com-plete".▶ Press .a The appliance switches to standby mode.a The display shows the standby screen.a The appliance is ready to use.Heating up the appliance1. Ensure that there is no leftover packaging in thecooking compartment.2. To eliminate the new-appliance smell, heat up theempty appliance for an hour at 200 °C in the Hot airtype of heating with the door closed.Cleaning accessories▶ Before first use, clean the accessories thoroughlyusing hot soapy water and a soft cloth.7 Basic operation7.1 Activating the appliance1. To exit standby mode, open the door and turn thefunction selector or touch a touch field.2. Set the required function.7.2 Opening the appliance door1. Press .a The appliance opens the appliance door.2. Use the recessed grip on the side of the oven toopen the appliance door fully.In the event of a power failure, the automatic door-opening does not work. You can open the door byhand using the recessed grip on the side.7.3 Switching on the appliance1. Use the function selector to set the required type ofheating.a The display shows the selected type of heating andthe suggested temperature.2. If required, use the rotary selector to set the desiredtemperature.a The display shows the heating symbol .a The bar displays the current heating status.a Once the appliance reaches the set temperature, asignal tone sounds and the heating symbol goesout .Note: If the temperature is set to less than 70 °C, thecooking compartment light will remain switched off.