Gaggenau BO420 2 Series User Manual And Installation Instructions

Also see for BO 420 2 Series: Instruction manual Instruction manual

en Installation instructions4621.6 LAN connection to the home networkThis appliance can be networked. You can connect theappliance to the home network using a LAN cable. Thescope of delivery does not include a LAN cable.Establishing the LAN connection1. Before installing the appliance, insert a LAN cableinto the socket on the back of the appliance.2. Use the strain relief to secure the LAN cable inplace.3. Connect the LAN cable to a network connection.21.7 Installing the appliance1. Observe the clearances when installing in a tall unit.When installing 2 appliances next to each other,align both handles to the centre.2. If there is no intermediate floor above the appliance,secure the appliance against tipping in the unit. Se-cure two commercially available brackets on bothsides in the unit at a depth of 450 mm, 5 mm abovethe height of the appliance.3. Push the appliance all the way into the built-in unit.‒ Do not kink or trap the connection cable, orroute it over sharp edges.4. Centre the appliance.There must be an air gap of at least 2 mm betweenthe appliance and the adjacent unit fronts.5. Use a spirit level to adjust the appliance so that it isperfectly level.6. Open the appliance door.7. Secure the appliance using the enclosed screws.‒ First, secure the appliance in place in the unit us-ing the lower screws .‒ Screw on the upper screw .