Gaggenau BO420 2 Series User Manual And Installation Instructions

Also see for BO 420 2 Series: Instruction manual Instruction manual

en Childproof lock149.2 Switching off the long-term timer ▶ Turn the function selector to .10 Childproof lockActivate the childproof lock so that children cannot ac-cidentally switch the appliance on or change the set-tings.If the childproof lock is switched on and the powerfails, the childproof lock can be deactivated when thepower comes back on.10.1 Activating the childproof lockRequirements¡ You can set the childproof lock to "available" in thebasic settings → Page 17.¡ The function selector is set to .▶ Press and hold for approx. 6 seconds.a The display shows the standby screen and .a The childproof lock is activated.10.2 Deactivating the childproof lockRequirement: The function selector is set to .1. Press and hold for approx. 6 seconds.a The childproof lock is deactivated.2. Set the appliance as normal.11 Individual recipesYou have the option to save up to 50 individual recipeswith a name so that, if required, you can access the re-cipe quickly and easily. You can record a recipe.11.1 Recording a recipeIt is possible to set and record up to 5 phases consec-utively.1. Turn the function selector to .2. Press .3. Use the rotary selector to select "Individual recipes".4. Press to confirm.5. Use the rotary selector to select a free memory loc-ation.6. Press .7. Use the function selector to set the required type ofheating and the rotary selector to set the requiredtemperature.a The appliance records the cooking time.8. Insert the core temperature probe into the socket inthe cooking compartment and enter the core tem-perature for a phase.9. To record another phase, set the function selectorto the required type of heating and use the rotaryselector to set the required temperature.a A new phase starts.10. When the dish has reached the required cookingresult, press .11. Enter the name under "ABC".→ "Entering a name", Page 14The appliance only starts recording a phase once ithas reached the set temperature.Each phase must last at least one minute.During the first minute of a phase, you can changethe type of heating or the temperature.11.2 Programming a recipe1. Turn the function selector to .2. Press .3. Use the rotary selector to select "Individual recipes"and press to confirm.4. Use the rotary selector to select a free memory loc-ation.5. Press .6. Enter the name under "ABC".→ "Entering a name", Page 147. Use to select the first phase.a The display shows the type of heating and temperat-ure that are selected at the start.8. If required, use the rotary selector to change thetype of heating and the temperature.9. Insert the core temperature probe into the socket inthe cooking compartment and enter the core tem-perature for a phase or select the time setting using.You cannot enter the cooking time for phases with aprogrammed core temperature.10. Use the rotary selector to set the required cookingtime.11. If the preparation is complete, use to finish mak-ing entries or use to select the next phase.12. Use to save or to cancel, and exit the menu.11.3 Entering a name1. Enter a name for the recipe under "ABC".2. Use the rotary selector to select the letters.A new word always begins with a capital letter.Latin characters, certain special characters andnumbers are available.3. Briefly press to position the cursor to the right.4. Press and hold to switch to umlauts and spe-cial characters.5. Press twice to insert a break.6. Briefly press to position the cursor to the right.7. Press and hold to switch to normal characters.8. Press twice to insert a break.9. Press to delete a letter.10. Use to save or to cancel, and exit the menu.11.4 Starting a recipe1. Turn the function selector to .2. Press .