Gaggenau BS 470 Instruction Manual

Also see for BS 470: Installation instructions Use and care manual Instruction manual Instruction manual

Contents

Gaggenau BS 470 Instruction Manual Manual pdf 25 page image

25Inserting the core temperature probein the food to be cookedInsert the core temperature probe in the food to becooked before you place it in the cooking interior.Insert the metal tip at the thickest point in the food to becooked. Make sure that the end of the tip isapproximately in the centre. It must not be placed in thefat and must not touch any cookware or bones.If there are several pieces, insert the core temperatureprobe in the middle of the thickest piece.Insert the core temperature probe completely, ifpossible.In the case of poultry, make sure that the tip of the coretemperature probe is not in the cavity in the centre, butin the meat between the belly and upper leg.Setting the core temperature1 Insert food into the oven interior with the coretemperature probe inserted. Insert the coretemperature probe in the socket in the oven interiorand close the appliance door.Do not jam the core temperature probe's cable!2 Set the function selector to the required heatingmode.3 Set the oven interior temperature with the rotaryselector.4 Touch the + symbol. With the rotary selector, setthe required core temperature and confirm it with+.The set core temperature must be higher than thecurrent core temperature.5 The appliance heats with the set heating mode.The current core temperature is displayed and,under it, the set core temperature.You can change the set core temperatur at any time.A signal sounds when the set core temperature in thefood has been reached. The cooking mode is endedautomatically. Confirm with ™ and turn the functionselector to 0.Notes‒ The measurable range is 15 °C to 99 °C. Outsidethe measurable area, "--°C" is displayed for thecurrent core temperature.‒ If you leave food in the cooking compartment forsome time after cooking, the core temperaturecontinues to rise somewhat due to the residual heatin the cooking compartment.‒ If you set the core temperature probe and thecooking timer at the same time, the applianceswitches off whichever programme reaches theentered value first.Changing the set core temperature:Touch the + symbol. Use the rotary selector to changethe set core temperature for the food and confirm with+.Deleting the set core temperature:Touch the + symbol. Delete the set core temperaturewith Ž. The appliance continues heating in normalcooking operation.